Datasheet

60
Fig. 8
Fig. 9
Fig. 10
Fig. 11
16.1.4 To Remove the Discharge Grille
• Pull out the Drain Hose (behind the Discharge Grille) from outlet
to remove the Discharge Grille. (Fig. 8)
16.1.5 To Remove Control Board
• Release the 3 screws (Fig. 9)
• By pressing down the hook at left hand side of control board, you
will be able to remove the Control Board. (Fig. 9)
16.1.6 To Remove the Cross Flow Fan and Indoor Fan Motor
• Remove the screw at the Cross Flow Fan. (Fig. 10)
Reminder: To reinstall the Fan Motor, please adjust the connector
location to 45° with Fan Motor before fixing Control Board. (Fig.
10)
• Remove the Bearing. (Fig. 11)
• Remove the screw at the left of the Evaporator. (Fig. 11)
• Press the Hold to left hand side then you can release the
Evaporator. (Fig. 11)