Datasheet

10
Interference
prevention fi lter
PF-CX4-V
•
(Vertical, Silver)
PF-CX4-H
•
(Horizontal, Light brown)
Two sets of CX-411

can be mounted close
together.
Designation
Model No.
Slit size
Sensing range Min. sensing object
Slit mask Sensor Slit on one side Slit on both sides Slit on one side Slit on both sides
Round slit mask
( )
For thru-
beam type
sensor only
OS-CX-05
CX-411
ø0.5 mm
ø0.020 in
400 mm 15.748 in 20 mm 0.787 in
ø12 mm ø0.472 in ø0.5 mm ø0.020 in
CX-412
600 mm 23.622 in 30 mm 1.181 in
CX-413
1,200 mm 47.242 in 60 mm 2.362 in
OS-CX-1
CX-411
ø1 mm
ø0.039 in
900 mm 35.433 in 100 mm 3.937 in
ø12 mm ø0.472 in
ø1 mm ø0.039 in
CX-412
1.35 m 4.429 ft 150 mm 5.906 in
ø1.5 mm ø0.059 in
CX-413
2.7 m 8.857 ft 300 mm 11.811 in
OS-CX-2
CX-411
ø2 mm
ø0.079 in
2 m 6.562 ft 400 mm 15.748 in
ø12 mm ø0.472 in
ø2 mm ø0.079 in
CX-412
3 m 9.843 ft 600 mm 23.622 in
ø3 mm ø0.118 in
CX-413
6 m 19.685 ft 1,200 mm 47.242 in
Rectangular slit
mask
( )
For thru-
beam type
sensor only
OS-CX-05×6
CX-411
0.5×6 mm
0.020×0.236 in
2 m 6.562 ft 400 mm 15.748 in
ø12 mm ø0.472 in
0.5×6 mm
0.020×0.236 in
CX-412
3 m 9.843 ft 600 mm 23.622 in
CX-413
6 m 19.685 ft 1,200 mm 47.242 in
OS-CX-1×6
CX-411
1×6 mm
0.039×0.236 in
3 m 9.843 ft 1 m 3.281 ft
ø12 mm ø0.472 in
1×6 mm
0.039×0.236 in
CX-412
4.5 m 14.764 ft 1.5 m 4.921 ft
CX-413
9 m 29.528 ft 3 m 9.843 ft
OS-CX-2×6
CX-411
2×6 mm
0.079×0.236 in
5 m 16.404 ft 2 m 6.562 ft
ø12 mm ø0.472 in
2×6 mm
0.079×0.236 in
CX-412
7.5 m 24.606 ft 3 m 9.843 ft
CX-413
15 m 49.213 ft 6 m 19.685 ft
OPTIONS
Designation Model No. Sensing range Min. sensing object
Interference
prevention fi lter
( )
For CX-411
only
PF-CX4-V
(Vertical, Silver) 2 pcs. per set
5 m 16.404 ft (Note 1)
ø12 mm
ø0.472 in
(Note 1)
PF-CX4-H
(Horizonal, Light brown) 2 pcs. per set
Refl ector
( )
For retro-
refl ective type
sensor only
RF-210
CX-491
1 m 3.281 ft (Note 2)
ø30 mm
ø1.181 in
CX-493
1.5 m 4.921 ft (Note 2)
CX-481
CX-483
0.1 to 0.3 m 0.3288 to 0.984 ft (Note 2)
CX-482
0.1 to 0.6 m 0.328 to 1.969 ft (Note 2)
RF-220
CX-491
1.5 m 4.921 ft (Note 2)
ø35 mm
ø1.378 in
CX-493
3 m 9.843 ft (Note 2)
CX-481
50 to 300 mm 1.969 to 11.811 in (Note 2)
CX-483
0.1 to 0.7 m 0.328 to 2.297 ft (Note 2)
CX-482
0.1 to 1.3 m 0.328 to 4.265 ft (Note 2)
RF-230(Note 3) CX-491-Y
3 m 9.843 ft (Note 2) ø50 mm ø1.969 in
Notes: 1) Value when attached on both sides.
2) Set the distance between the CX-491/493 and the refl ector to 0.1 m
0.328 ft or more.
However, see the table below for CX-48
.
The sensing range “A” may vary depending on the shape of sensing object.
Be sure to check the operation with the actual sensing object.
Setting range
of the reflector: B
Sensing
object
Sensing
range: A
Sensor Reflector
Model No.
AB
Sensor Refl ector
CX-481 RF-220
50 to 300 mm 1.969 to 11.811 in 100 to 300 mm 3.937 to 11.811 in
CX-483
RF-220
0.1 to 0.7 m 0.328 to 2.297 ft 0.2 to 0.7 m 0.656 to 2.297 ft
RF-210 0.1 to 0.3 m 0.328 to 0.984 ft 0.1 to 0.3 m 0.328 to 0.984 ft
RF-230 0.05 to 1 m 0.164 to 3.281 ft 0.1 to 1 m 0.328 to 3.281 ft
CX-482
RF-220
0.1 to 1.3 m 0.328 to 4.265 ft 0.5 to 1.3 m 1.640 to 4.265 ft
RF-210 0.1 to 0.6 m 0.328 to 1.969 ft 0.3 to 0.6 m 0.984 to 1.969 ft
3) RF-230 is attached to the retrorefl ective type sensor other than the basic type.
Round slit mask
OS-CX-
•

Fitted on the front face
of the sensor with one-
touch.
Rectangular slit
mask
OS-CX-
•
×6
Fitted on the front face
of the sensor with one-
touch.
Round slit mask
(Stainless steel)
Rectangular slit mask
(Stainless steel)
Interference prevention filter
50.3 mm
1.98 in
8.3 mm
0.327 in
59.3 mm
2.235 in
Refl ector
RF-210
•
RF-220
•
33.3 mm
1.311 in
11 mm
0.433 in
12.8 mm
0.504 in
35.3 mm
1.390 in
8.3 mm
0.327 in
42.3 mm
1.665 in
RF-230
•
18/07/2011