Operating Instructions

6. Timer Operation

EN-9

• When setting the timer, make sure the current time on the remote control is accurate.

• The timer’s clock can only be set when the display of the remote control is ON.

• After setting the timer, put the remote control in a place where its signal will reach the receiver of the

indoor unit. (When the time set for the timer is reached, a signal is sent from the remote control to

Start/Stop the unit.)

Using the Timer

1. Press either

of the

, and while the time is

being displayed, if you press

again, a scheduled time can

be set.

The time last set on the timer is displayed.

“--:--“ indicates time to change the batteries.

2. Press either

of the

or and set the timer to the

desired time.

Every time you press

, the time changes in 10 minute increments.

If you press and hold the button, the time changes quickly.

3. After setting the timer, if you press , the time you set

changes to a steady display, indicating settings are complete.

After the timer setting is displayed for three seconds, the display reverts to

the current time.

1, 23

OI_072023_all.indb EN-9OI_072023_all.indb EN-9 2014/12/19 10:24:082014/12/19 10:24:08