Operating Instructions

EN-18
Note
The Test Run/On and Test/On switches are for use when the unit is installed and test run. It is not for normal
use.
If the [Normal/Stop ALL] switch is on
Stop ALL, the unit cannot receive signals from the remote control.
CZ-RWSC3/CZ-RWSL2
1. Press [Emergency Operation] of the receiver.
If the indoor temperature is 24 °C or greater when the unit starts running, it will act as a cooler.
If the indoor temperature is less than 24 °C when the unit starts running, it will act as a heater.
2. If you press , the wind direction automatically oscillates up and down.
Stop: press [Emergency Operation]
of the receiver again.
21
CZ-RWSL2 CZ-RWSC3
Note
The Test Run/On and Test/On switches are for use when the unit is installed and test run. It is not for normal
use.
If the [Normal/Stop ALL] switch is on
Stop ALL, the unit cannot receive signals from the remote control.
12. Emergency Operation (Cont.)
1
OI_072023_all.indb EN-18OI_072023_all.indb EN-18 2014/12/19 10:24:192014/12/19 10:24:19