Quick Start Guide

Recording

DVQX1064 (ENG)

8 Press the motion picture button (or shutter button) to

start recording.

• If you have enabled [Focus Transition Rec], Focus

Transition will start when you start recording a motion

picture.

9 Touch [POS 1], [POS 2], or [POS 3] to start Focus

Transition.

• The same operation can be performed by pressing 2/1 to

select the position and pressing [MENU/SET].

• The MF Guide will display the current focus position A and the registered focus position

• Press [ ] to end Focus Transition.

10 Press the motion picture button (or shutter button) again to stop recording.

• Maintain the same distance to the subject after setting the focus position.

• The moving speed of focus varies depending on the lens being used.

By cropping your motion picture down from the 4K angle of view to Full High Definition,

you can record a motion picture that pans and zooms in/out while leaving the camera in a

fixed position.

• The motion picture size automatically changes to [FHD].

• Hold the camera firmly in place while recording.

1 Set the mode dial to [ ].

2 Select the menu. (P26)

• Any of the operations below will clear the focus position settings. To use them again, re-register

focus positions.

– Operating the camera on/off switch

– Zoom operation

– Switching the Focus Mode

– Switching the Recording Mode

– Replacing the lens

Recording Motion Pictures that Pan and Zoom While Maintaining a

Fixed Camera Position ([4K Live Cropping])

Pan Zoom in

> [Creative Video] > [4K Live Cropping] > [40SEC]/[20SEC]

POS 2 POS 3POS 1

POS 1

DC-GH5LMBodyEB-DVQX1064_eng.book 64 ページ２０１７年２月２日　木曜日　午後３時１５分