Operating Instructions DVD Recorder DMR-ES35V

RAM
9927
Recording
FUNCTIONS
FUNCTIONS
DVD VHS
Press ENTERtoinput a programme name.
ENTER
RETURN
Delete
SP
On
Programme Name
3 Euros 11.03. SAT 14:00 16:00
Ü
VPS
Please set Channel.
Timer
Recording
ENTER
RETURN
Name Date Start Stop PDCMode
- -.- -.- - -
- -:- -
- -:- -
SP
Programme Name
Drive
---
Remain DVD 2:00 SP
VHS --:-- -- 12:40:46 24. 2. FRI
VPS
Name Date Start Stop Drive PDCMode
DVD
Timer
Recording
Remain DVD 2:00 SP
VHS --:-- -- 12:40:46 24. 2. FRI
0
9
Number
---
ENTER
RETURN
Timer Recording
This programme has been stored.
Insert a recordable cassette.
Cannot set timer standby mode.
VPS/PDC feature
If the broadcaster sends VPS/PDC signals, the beginning and end of a recording are
synchronised with the current broadcast time. The programme start time must be
correctly set to the VPS/PDC start time listed in the magazine.
!
!
After you have made your changes, save the programming with .
To enter other programmes, select [New Timer Programme].
ENTER
Manual programming
Drive : Select the drive.
Mode : Recording mode DVD: XP, LP, EP, SP, FR. If you selected VPS/PDC
[On], recording mode FR is not possible.
: Recording mode VHS: SP, LP, EP, AUTO
VPS/PDC : [On] [Off/–]: If you selected [On], timer programmings will only be
deleted from the list two days after recording.
!
!
!
To enter the title of the recording, select [Programme Name] with and confirm
with .
Enter the desired name in the Programme Name menu.
Press to apply the name.
ENTER
STOP
If you programmed the timer programmes one after the other in sequential
order, the first few seconds of the second timer recording are not recorded.
With other types of discs, it is approx. 30 seconds.
Name : Select the programme position/name of the TV station with .
Date : One-time, daily or weekly programming.
Start/Stop : Start time/end of recording. If you press and hold the buttons,
the time increases/decreases in 30-minute intervals. You can also use
the number buttons for these entries.
Drive space
OK
(Date)
: There is sufficient storage space available for the programmed recording.
— : Storage space will not be calculated.
: The existing storage space is displayed for daily or weekly recordings.
: The disc was not inserted, it is write-protected or there is insufficient storage
space available.
!
Automatic SP/LP switching during a VHS recording
AUTO: If there is insufficient recoding time left on a video cassette, the SP/LP function
switches the video recording speed to LP; NTSC to EP. This ensures that the
programme is recorded in full. Should the remaining recording time on the video
cassette still not be sufficient even in LP mode, then the programme will not be recorded
in full. Automatic switching to EP mode is not possible.
!
!
!
!
Press .
Select [Recording] with and confirm with .
The Timer Recording screen appears.
Confirm [New Timer Programme] with .
Switch to the next entry with and change the setting with .
FUNCTIONS
ENTER
ENTER
A timer recording does not start while a disc is being formatted, deleted or finalised.
The recording begins afterwards.
34
Make sure that there is a recordable disc or cassette in the selected drive.
Otherwise, the timer recording will not run.
The unit automatically switches to timer mode at the start time.
REC flashes in the unit's display one minute before the recording is set to start.
If you receive your TV programme via a Set Top Box (DVB-T) or a satellite receiver
(digital/analogue):
On the external unit, select the station with the programme that you want to record.
The station must not be changed during the recording.
It is always the programme on this set station which is recorded.
Name : Select AV2 as the name of the TV station with .
VPS/PDC : This feature cannot be used.
If you did not insert a cassette or disc,
the following message appears:
Timer
Recording
Remain DVD 2:00 SP
12:40:46 24. 2. FRIVHS --:-- --
The remaining time of a VHS cassette will
only be displayed after using a function like
playback, fast forward or such.