Operating Instructions DVD Recorder DMR-ES35V

DVD VHS
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
AV2 Input
Video
AV2 Settings
Ext Link
Ext Link 2
AV2 Connection
Ext
Ext Link 1
Ext Link
Ext Link 2
VHS
SELECT
RETURN
ENTER
FUNCTIONS
36
Setting for external units (EXT LINK)
EXT LINKYou control the recording function via an external unit (e.g. a receiver) with .
Connect the unit to the AV2 socket with a 21-pin Scart cable.
Switching the DVD Recorder to recording standby mode
The beginning of the recording may not be recorded correctly.
!
!
!
!
!
!
Press , select [To Others] with and press .
Select [Setup] with and press .
Select [Connection] with and [AV2 Settings] with , and press .
Select [Ext Link] with and confirm with .
Select [Ext Link 1] or [Ext Link 2] with and confirm with .
Press multiple times to return to the television picture.
FUNCTIONS ENTER
ENTER
ENTER
ENTER
ENTER
RETURN
!
Press to switch off recording standby mode.
EXT-L disappears from the display.
EXT LINK
!
!
Select recording drive DVD or VHS with .
Press .
Recording standby mode for -controlled recordings is activated. The
selected drive and EXT-L appear on the display.
DRIVE SELECT
EXT LINK
EXT LINK
The programming for a timer recording takes place on an external unit. Read the
operating instructions for your external unit.
Recording programming on an external unit
The recording begins if an appropriate signal is received from a connected unit.
As long as this signal is transmitted by the external unit, the selected drive
will record it.
!
Stop the transfer of the recording signal on the external unit.
Switching off recording standby mode
Timer recording via external units
Prematurely cancelling recording
!
Press to switch off recording standby mode.
EXT-L disappears from the display.
EXT LINK
Ext Link 1
Ext Link 2
: For digital receivers that send a special recording control signal, e.g.
the F.U.N. receiver (TU-DSF41).
: External recording control for satellite or digital receivers (video signal).
The Ext Link 2 setting cannot be used if the input signal is in NTSC format.