Operating Instructions DVD Recorder DMR-ES35V

EXTERNAL INPUT
PLAYBACK
RECORDING
18
47
54
35
36
16
47
18
6
47
22
52
52
23
12
52
51
13
Playback does not start.
î
î
î
î
No disc or video cassette inserted.
The disc is dirty or badly scratched.
You inserted a disc that is not suitable for playback.
You inserted a blank disc.
DVD-Video will not play.
î
Some DVD-Videos cannot be played if the security level has been changed.
No reaction when
.
PLAY is
pressed
î
î
appears on the screen.
disc.
Child protection has been activated.
The procedure is being prevented by the unit or the
A title or chapter is not played
back after being selected.
î
Some titles or chapters of DVD-Videos are not played back if the security level
has been changed.
Soundtrack/subtitles cannot be
selected or do not match the
language selected in the Setup
menu.
î
î
The languages were not recorded on the disc.
You may need to use the disc menu to select the languages.
î
The subtitles were not recorded on the disc or are not switched on.
The angle cannot be changed.
î
The angle perspective can only be changed for scenes that were recorded from
different angles.
You forgot your security password.
!
Select the DVD drive and, while the disc tray is open, press and hold and
on the unit for at least 5 seconds.
REC
PLAY
Cannot record.
î
î
î
î
î
î
î
The video cassette is write-protected.
Check whether the inserted disc is suitable for recording.
The disc is not formatted. Format the disc.
The write-protection device on the cartridge is set to "PROTECT".
Deactivate the write-protection.
Deactivate the write-protection in the DVD Management menu.
The material that you want to record is copy-protected. The number of possible
copies is limited with some programmes.
Discs containing PAL and NTSC signals cannot be recorded.
Some or all recorded programmes
were lost.
î
If there is a power cut during recording or processing, or if the unit is unplugged
from the power supply, the programme may be lost or the disc may be damaged.
Reformat the disc or use a new disc.
Timer Recording
is not functioning.
î
î
The Timer programming is defective, different Timer programmes overlap each
other. Correct the programming.
Check the clock setting.
Timer Recording
cannot be cancelled.
!
With an -controlled recording via an external unit, press .
The EXT-L display disappears.
EXT LINK EXT LINK
Video or audio is not recorded
from an external unit.
î
î
The external unit is not connected correctly.
The incorrect input channel AV2, AV3 or DV IN was selected.
î
If you want to cancel the recording prematurely, stop the transfer of recording
signal on the external unit. Press to switch off recording standby.EXT LINK
If you need help
Page
58
54