Manual

5. Image and Picture Quality Settings

128

Set the White Balance value. Use to match the condition when taking photographs.

1 Press 1 [].

2 Rotate the rear dial to select [ ], [ ], [ ], or [ ], and then press 3.

3 Aim the camera at a sheet of white paper etc. so that

the frame in the center is filled by the white object

only and then press [MENU/SET].

•

White Balance may not be set when the subject is too bright or too dark. Set the White Balance

again after adjusting to appropriate brightness.

You can set the color temperature manually for taking natural pictures in different lighting

conditions.

The color of light is measured as a number in degrees Kelvin. As the color temperature

increases, the picture becomes more bluish. As the color temperature decreases, the

picture becomes more reddish.

1 Press 1 [].

2 Rotate the rear dial to select [ ], and then press

3 Press 3/4 to select the color temperature and then

press [MENU/SET].

•

You can set a color temperature from [2500K] to [10000K].

Setting the White Balance manually

Setting the color temperature

1 2

6500K