Operating Instructions Digital Camera DMC-FZ20PP

Recording pictures (basic)
32
∫ Program AE
The camera automatically sets the shutter
speed and the aperture value according to
the brightness of the subject.
• Insert the charged battery. (P15)
• Insert the card. (P16)
• Remove the lens cap.
1 1 Turn the camera on.
2 Set the mode dial to program
AE mode [ ].
3 Slide the focus switch to [AF].
• The power indicator (green) lights.
When it blinks, the remaining battery
power is low. Insert a fully charged
battery.
2 Aim the AF area 1 to the point
you want to focus and then press
the shutter button halfway.
• A: Press the shutter button halfway to
focus.
• The focus indication 2 is lit and then
the aperture value 3 and the shutter
speed 4 are displayed.
3 Take a picture.
• B: Press the shutter button fully to take
the picture.
OFF ON
OPEN
FOCUS
AF
MF
M
S
A
SCN
1
SCN
2
P
When the
subject is not
focused
When the
subject is
focused
Focus
indication
Blink (green) On (green)
AF area Turns from
white to red
Tu rn s fro m
white to green
Sound Beeps 4 times Beeps 2 times
1/25F2.8
1/25F2.8
FZ20-PP.book 32 ページ ２００４年７月６日 火曜日 午後２時６分