Owner's manual

Basic
42
VQT0X92
If you select [MULTI DELETE], perform
steps
3 onwards.
If you select [ALL DELETE], perform
steps
5 onwards.
When [FAVORITE] (P103) is set to
[ON], [ALL DELETE EXCEPT ]
appears. If you select [ALL DELETE
EXCEPT ], perform steps
5 onwards.
(However, if none of the pictures have
[ ] displayed, you cannot select [ALL
DELETE EXCEPT ] even if
[FAVORITE] is set to [ON].)
3 Press
/
to select the picture
and then press
to set.
(Only when selecting [MULTI DELETE])
Repeat the above procedure.
[ ] appears on the selected pictures. If
is pressed again, the setting is
canceled.
The icon [ ] blinks red if the selected
picture is protected and cannot be
deleted. Cancel the protect setting and
then delete the picture. (P107)
4 Press [ ].
5 Press
to select [YES] and then
press [MENU/SET] to set.
(Screen when selecting
[MULTI DELETE])
[DELETE ALL IMAGES IN THE
MEMORY CARD?] is displayed when
using [ALL DELETE] and [DELETE ALL
EXCEPT ?] is displayed when using
[ALL DELETE EXCEPT ].
If you press [MENU/SET] while deleting
pictures using [ALL DELETE] or [ALL
DELETE EXCEPT ], the deleting will
stop halfway.
Once deleted, pictures cannot be
recovered. Double-check pictures
before deleting them.
Do not turn off the camera while deleting.
When deleting pictures, use a battery with
sufficient battery power (P16) or the AC
adaptor (DMW-AC7; optional).
It is possible to delete up to 50 pictures at
one time using [MULTI DELETE].
The greater the number of pictures the
longer it takes to delete them.
If there are pictures that are protected
[ ] (P107), do not conform to the DCF
standard (P41) or are in a card with the
Write-Protect switch slid to the [LOCK]
side (P20), they are not deleted even if
[ALL DELETE] or [ALL DELETE
EXCEPT ] is selected.
MARK/UNMARK
DELETE
EXIT
SELECT
7
MULTI DELETE
MENU
11
8 9
1210
SELECT SET
MULTI DELETE
MENU
SET
DELETE THE PICTURES
YOU MARKED?
NO
YES
SET
MENU