Operating Instructions

VQT1U32

Preparation

Setting Date/Time (Clock Set)

• The clock is not set when the camera is shipped.

Turn the camera on.

A [MENU/SET] button

Press [MENU/SET].

Press 2/1 to select the items (year, month,

day, hour, minute, display sequence or time

display format), and press 3/4 to set.

A: Time at the home area

B: Time at the travel destination (P133)

‚: Cancel without setting the clock.

•

Select either [24HRS] or [AM/PM] for the time display

format.

• AM/PM is displayed when [AM/PM] is selected.

• When [AM/PM] is selected as the time display format, midnight is displayed as AM

12:00 and noon is displayed as PM 12:00. This display format is common in the US and

elsewhere.

Press [MENU/SET] to set.

• Turn the camera off after finishing setting the clock. Then turn it on and check that the

clock setting is correct.

• When [MENU/SET] has been pressed to complete the settings without the clock having

been set, set the clock correctly by following the

“Changing the clock setting”

procedure below.

Select [CLOCK SET] in the [SETUP] menu, and press 1. (P27)

•

It can be changed in steps 3 and 4 to set the clock.

• The clock setting is maintained for 3 months using the built-in clock battery even

without the battery. (Leave the charged battery in the unit for 24 hours to charge the

built-in battery.)

Changing the clock setting

OFF

/SET