Operating Instructions

47
VQT1U32
Basic
In Program AE mode, you can change the preset aperture
value and shutter speed without changing the exposure.
This is called Program shift.
You can make the background more blurred by
decreasing the aperture value or record a moving subject
more dynamically by slowing the shutter speed when
taking a picture in Program AE mode.
1 Press the shutter button halfway and display the aperture value and shutter
speed value on the screen.
2 While the values are displayed (about 10 seconds), perform the Program shift
by rotating the front dial.
It will switch between Program shift operation and exposure compensation operation (P63)
every time the front dial is pressed while the values are displayed.
The Program shift indication A appears on the screen when Program shift is activated.
To cancel Program shift, turn the camera off or rotate the front dial until the Program shift
indication disappears.
Example of Program shift
When 1445 mm/F3.55.6 lens included in DMC-G1K is used
Note
How the exposure compensation is switched can be changed by [EXPO. SETTINGS] (P108) in
the [CUSTOM MENU] menu.
If the exposure is not adequate when the shutter button is pressed halfway, the aperture value
and shutter speed turn red and blink.
Program shift is canceled and the camera returns to normal Program AE mode if more than
10 seconds pass after Program shift is activated. However, the Program shift setting is
memorized.
Depending on the brightness of the subject, Program shift may not be activated.
Program shift
(A): Aperture value
(B): Shutter speed
1 Program shift amount
2 Program line chart
(A)
(B)
4 2 1 1
/
2
1
/
4
1
/
8
1
/
15
1
/
30
1
/
60
1
/
125
1
/
250
1
/
500
1
/
1000
1
/
2000
1
/
4000
15
16
17
18
19
20
(Ev)
2
2.8
4
5.6
8
11
16
22
1
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14