Operating Instructions

VQT1U32

Advanced (Recording pictures)

Note

•

The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the

amount of picture noise.

• Refer to P60 for the flash range.

• Depending on the brightness and how fast the subject is moving, jitter may not be avoided even

if [ ] is selected.

• Movements may not be detected when a moving subject is small, when a moving subject is at

the edge of the screen or when a subject has moved at the very moment when the shutter

button was pressed fully.

• The setting is fixed to [ ] in the following cases.

– In [BABY1]/[BABY2] and [PET] in scene mode

– In [INDOOR PORTRAIT], [NORMAL SPORTS], [OUTDOOR SPORTS] and [INDOOR

SPORTS] in advanced scene mode

• Program shift cannot be activated when the ISO sensitivity is set to [ ].

• You cannot select [ ] in shutter-priority AE mode and manual exposure mode. Also, you

cannot select [AUTO] in manual exposure mode.

• To avoid picture noise, we recommend reducing the ISO sensitivity, setting [NOISE RED.] in

[FILM MODE] towards [_] or setting the items except [NOISE RED.] towards [`] to take

pictures. (P82)