Quick Start Guide

33
(ENG) VQT3N48
Recording Mode:
Taking Pictures with Your Favourite Settings
(Programme AE Mode)
The camera automatically sets the shutter speed and the aperture value according to the
brightness of the subject.
You can take pictures with greater freedom by changing various settings in [REC] menu.
Set the mode dial to [ ].
Note
•
The shutter speed is automatically set between about 20 seconds and 1/4000th of a second in
the following cases.
– When the [SENSITIVITY] is set to [ISO160].
– When the aperture value is set to F3.5 [when the interchangeable lens (H-FS014042) is
attached].
– When the aperture value is set to F4.0 [when the interchangeable lens (H-FS045200) is
attached].
In Programme AE Mode, you can change the preset aperture value and shutter speed
without changing the exposure. This is called Programme Shift.
You can make the background more blurred by decreasing the aperture value or record a
moving subject more dynamically by slowing the shutter speed when taking a picture in
Programme AE Mode.
1 Press the shutter button halfway and display the
aperture value and shutter speed value on the screen.
2 While the values are displayed (about 10 seconds),
perform the Programme Shift by rotating the rear dial.
•
It will switch between Programme Shift operation and Exposure
Compensation operation every time the rear dial is pressed while
the values are displayed.
• Rotate the rear dial to display the [EXPO.METER] B.
• The Programme Shift indication A appears on the screen when Programme Shift is activated.
• To cancel Programme Shift, turn the camera off or rotate the rear dial until the Programme Shift
indication disappears.
Programme Shift
A B
DMC-G3K&G3W&G3EB-VQT3N48_eng.book 33 ページ ２０１１年４月２９日 金曜日 午後１２時４８分