Operation Manual

5. 4K Photo and Drive Settings
120
4
Record a 4K photo.
[]
[4K Burst]
1 Press the shutter button halfway.
A Available recording time
2 Press and hold the shutter button fully for as
long as you want to perform recording.
•
Press the button fully slightly in advance.
Recording starts approximately 0.5 seconds after it
has been pressed fully.
• If you are using Auto Focus, [Continuous AF] will
work during recording. Focus will be adjusted
continuously.
• If you remove your finger from the shutter button immediately after
the start of recording, up to a period of approximately 1.5 seconds
after the moment that the finger has been removed may be
recorded.
[]
[4K Burst(S/S)]
1 Press the shutter button fully to start
recording.
B Available recording time
• If you are using Auto Focus, [Continuous AF] will
work during recording. Focus will be adjusted
continuously.
2 Press the shutter button fully again to stop
recording.
Adding markers to select and save
pictures
You can add markers if you press [Fn2] during recording. (Up to 40
markers per recording) When selecting and saving
pictures from a 4K
burst file, you can skip to the positions where you added markers.
[]
[4K Pre-Burst]
Press the shutter button fully.
C Number of recordings that can be made
• Auto Focus adjusts focus continuously, and except in
Manual Exposure Mode, it also adjusts exposure
continuously.
• When recording with [ ] ([4K Pre-Burst]), images may
not be displayed as smoothly as when recording with the
normal recording screen.
Recording tips
In situations where you want to lock focus and exposure, such as
when the subject is not at the centre, use [AF/AE LOCK]. (P105)
AFSAFS
4K
3
0
R 5m0404s R 5m04s
A
AFSAFS
4K
3
0
R 5m0404s R 5m04s
B
120012001200
AFSAFS
4K
3
0
C