Operation Manual

Table Of Contents
77
3. Recording Modes
When [Panorama Shot] is selected, after a screen is displayed asking you to check the
recording direction, horizontal/vertical guidelines are displayed.
1 Press the shutter button halfway to focus.
2 Press the shutter button fully and move the camera in a small circle in the
direction of the arrow on the screen.
3 Press the shutter button once again to end the picture recording.
Recording can also be ended by keeping the camera still while recording.
Recording can also be ended by moving the camera to the end of the guide.
Changing the recording direction and angle of view (image size) of panorama
pictures
>
[Rec]> [Panorama Settings]
The number of recording pixels in the horizontal and vertical directions of the panorama picture
varies depending on the image size,
the recording direction and the number of combined
pictures.
The maximum number of pixels is shown below.
Taking panorama pictures ([Panorama Shot])
Recording from left to right
Image size: [STANDARD] Image size: [WIDE]
Move the camera at a constant speed.
Pictures may not be able to be recorded properly if the
camera is moved too fast or slow.
A Recording direction and
panning (Guide)
[Direction] Sets the recording direction.
[Picture Size]
Sets the angle of view (image size).
[STANDARD]/[WIDE]
Image size Recording direction
Horizontal
Resolution
Vertical Resolution
[STANDARD]
Horizontal 8176 pixels 1920 pixels
Vertical 2560 pixels 7680 pixels
[WIDE]
Horizontal 8176 pixels 960 pixels
Vertical 1280 pixels 7680 pixels
A
MENU