User manual

- 183 -
Connecting to other equipment
Note
•
“PHOTOfunSTUDIO” is not compatible with Mac.
• Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery
power becomes low while the camera and the PC are communicating, the status indicator
blinks and the alarm beeps.
Refer to
“Disconnecting the USB connection cable safely” (P184) before disconnecting the
USB connection cable. Otherwise, data may be destroyed.
• Before connecting or disconnecting the AC adaptor (optional), turn the camera off.
• Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
∫ Copying to a PC without using “PHOTOfunSTUDIO”
If you are not able to install “PHOTOfunSTUDIO”, you can copy files and folders to your
PC by dragging and dropping files from this unit.
• The content (folder structure) on the card of this unit is as follows.
• AVCHD motion pictures may not be imported correctly when copied as files or folder. We
recommend using “PHOTOfunSTUDIO” on the CD-ROM (supplied) for importing files. Refer to
P181 for details.
• A new folder is created when pictures are taken in the following situations.
– After [No.Reset] (P73) in the [Setup] menu has been executed
– When a card containing a folder with the same folder number has been inserted (such as
when pictures were taken using another maker of camera)
– When there is a picture with file number 999 inside the folder
For Windows: A drive ([Removable Disk]) is displayed in [Computer]
For Mac: A drive ([LUMIX], [NO_NAME] or [Untitled]) is displayed on the
desktop
• Card
DCIM: Images
1 Folder number
2 Color space P: sRGB
_: AdobeRGB
3 File number
4 JPG: Still pictures
MP4: [MP4] Motion pictures
RW2: Pictures in RAW files
MPO: 3D pictures
MISC: DPOF print
Favorite
AVCHD: [AVCHD] Motion pictures
AVCHD
DCIM
100_PANA
101_PANA
999_PANA
P1000001.JPG
P1000002.JPG
P1000999.JPG
PRIVATE
MISC