User manual
Table Of Contents
- CONTENTS
- Before Use
- Preparation
- Basic
- Selecting the Recording Mode
- Tips for taking good pictures
- Taking a Still picture
- Taking Pictures using the Automatic Function (Intelligent Auto Mode)
- Easily adjust and record (Intelligent Auto Plus Mode)
- Taking Pictures with Defocus Control Function
- Taking Pictures with Your Favorite Settings (Program AE Mode)
- Recording Motion Picture
- Playing Back Pictures/Motion Pictures
- Deleting Pictures
- Setting the Menu
- Setting the Quick Menu
- About the Setup Menu
- Recording
- Optical Image Stabilizer
- Taking Pictures with the Zoom
- Taking Pictures using the Flash
- Compensating the Exposure
- Taking Pictures using Burst Mode
- Taking Pictures using Auto Bracket
- Taking Pictures with the Self-timer
- Taking Pictures with Auto Focus
- Taking Pictures with Manual Focus
- Adjusting the White Balance
- Using the function button
- Taking Pictures by Specifying the Aperture/ Shutter Speed
- Taking Pictures that match the Scene being recorded (Scene Guide Mode)
- [Clear Portrait]
- [Silky Skin]
- [Backlit Softness]
- [Clear in Backlight]
- [Relaxing Tone]
- [Sweet Child's Face]
- [Distinct Scenery]
- [Bright Blue Sky]
- [Romantic Sunset Glow]
- [Vivid Sunset Glow]
- [Glistening Water]
- [Clear Nightscape]
- [Cool Night Sky]
- [Warm Glowing Nightscape]
- [Artistic Nightscape]
- [Glittering Illuminations]
- [Clear Night Portrait]
- [Soft Image of a Flower]
- [Appetizing Food]
- [Cute Dessert]
- [Freeze Animal Motion]
- [Clear Sports Shot]
- [Monochrome]
- Taking Pictures with different image effects (Creative Control Mode)
- Taking Pictures in Custom Set
- Taking a Picture with Face Recognition Function
- Entering Text
- Using the [Rec] Menu
- [Photo Style]
- [Aspect Ratio]
- [Picture Size]
- [Quality]
- [Sensitivity]
- [ISO Limit Set]
- [ISO Increments]
- [Extended ISO]
- [Face Recog.]
- [Profile Setup]
- [Focus Mode]
- [Quick AF]
- [Metering Mode]
- [Flash]
- [Red-Eye Removal]
- [i.Resolution]
- [i.Dynamic] (Intelligent dynamic range control)
- [Long Shtr NR]
- [Shading Comp.]
- [Ex. Tele Conv.]
- [Digital Zoom]
- [Burst Rate]
- [Auto Bracket]
- [Self Timer]
- [Color Space]
- [Stabilizer]
- [Recommended Filter]
- Using the [Motion Picture] Menu
- Using the [Custom] Menu
- Playback/Editing
- Connecting to other equipment
- Others
Others
- 202 -
[Memory Card Error]/[Memory card parameter error]/[This memory card cannot be
used]
> Use a card compatible with this unit. (P23)
• SD Memory Card (8 MB to 2 GB)
• SDHC Memory Card (4 GB to 32 GB)
• SDXC Memory Card (48 GB, 64 GB)
[Insert SD card again]/[Try another card]
•
An error has occurred accessing the card.
> Insert the card again.
> Insert a different card.
[Read Error/Write Error
Please check the card]
•
It has failed to read or write data.
> Remove the card after turning the power [OFF]. Insert the card again, turn the power on,
and try to read or write the data again.
• The card may be broken.
> Insert a different card.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
> If you want to delete some pictures, format the card after saving necessary data on a PC
etc. (P73)
> Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the
card]
•
Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.
• In the event that it stops even after using a “Class 4” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format (P73).
• Depending on the type of the card, motion picture recording may stop in the middle.
[A folder cannot be created]
•
A folder cannot be created because there are no remaining folder numbers that can be used.
> Format the card after saving necessary data on a PC etc. (P73) If you execute [No.Reset]
in the [Setup] menu after formatting, the folder number is reset to 100. (P73)
[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
•
Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect. (P71)
• This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer. (P182,
186)
[This battery cannot be used]
•
Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or your nearest Service Center.
• If the battery terminal is dirty, clean it and remove any objects.