Operation Manual

- 101 -

Recording

Set the White Balance value. Use to match the condition when taking photographs.

1 Select [ ], [ ] and then touch [White Set].

2 Aim the camera at a sheet of white paper etc. so that

the frame in the centre is filled by the white object

only and then touch [Set].

Note

•

White Balance may not be set when the subject is too bright or too dark. Set the White Balance

again after adjusting to appropriate brightness.

You can set the colour temperature manually for taking natural pictures in different lighting

conditions. The colour of light is measured as a number in degrees Kelvin. As the colour

temperature increases, the picture becomes more bluish. As the colour temperature

decreases, the picture becomes more reddish.

1 Select [ ] and then touch [WB K Set].

2 Drag the colour temperature setting bar.

•

It is also possible to set the values by touching [ ]/[ ] or

pressing

3/4 of the cursor button.

• You can set a colour temperature from [2500K] to

[10000K].

3 Touch [Set].

Setting the White Balance manually

Setting the colour temperature