Operation Manual
- 107 -
Recording
Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
•
The exposure meter is displayed, and the aperture and shutter speed are changed to give
a suitable exposure. Which items of the settings change will depend on the Recording
Mode.
• In the following cases, suitable exposure cannot be set. (Exposure meter is displayed)
– When the subject is extremely dark and it is not possible to achieve adequate
exposure by changing the aperture value or shutter speed
– When recording using the flash
– In Preview Mode (P106)
– When using a lens that includes an aperture ring
Note
•
In mode, you can cancel programme shift B by pressing
function button.
Easily set aperture/shutter speed for suitable exposure (One Push AE)
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red A when the
shutter button is pressed halfway.
• If the Manual Exposure Assistance is anything other than
when in mode. For more details on Manual Exposure
Assistance, refer to P110.
1 Set the [Fn Button Set] of the [Custom] menu to [One Push AE].
•
This is the procedure for setting [Fn1].
2 (When exposure is not adequate) Press [Q.MENU/Fn1].
Recording
Mode
Settings that change
Aperture value
Shutter speed
Aperture value/Shutter speed
A
−−
3
+
30
−
3
+
30
B