Operation Manual

- 143 -
Recording
Applicable modes:
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
¢1 When the [ISO Limit Set] of the [Rec] menu (P144) is set to anything except [OFF], it is
set automatically within the value set in [ISO Limit Set].
¢2 Only available when [Extended ISO] is set.
¢3 When [Extended ISO] is set.
∫ About [ ] (Intelligent ISO sensitivity control)
The camera detects movement of the subject and then automatically sets the optimum
ISO sensitivity and shutter speed to suit the movement of the subject and brightness of the
scene to minimise the jitter of the subject.
•
The shutter speed is not fixed when the shutter button is pressed halfway. It is continuously
changing to match the movement of the subject until the shutter button is pressed fully.
Note
•
For the focus range of flash when [AUTO] is set, refer to P81.
[Sensitivity]
Settings Description of settings
AUTO
The ISO sensitivity is automatically adjusted according to the
brightness.
• Maximum [ISO1600]
¢1
(Intelligent)
The ISO sensitivity is adjusted according to the movement of
the subject and the brightness.
• Maximum [ISO1600]
¢1
160/200/400/800/1600/3200/
6400/H.12800
¢2
The ISO sensitivity is fixed to various settings.
(When the [ISO Increments] in the [Rec] menu (P144) is
set to [1/3 EV], items of ISO sensitivity that can be set
will increase.)
160 12800
¢3
Recording location
(recommended)
When it is light (outdoors) When it is dark
Shutter speed Slow Fast
Noise Less Increased
Jitter of the subject Increased Less