Operation Manual

Recording
- 148 -
Applicable modes:
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
[HIGH]/[STANDARD]/[LOW]/[OFF]
Note
•
This feature may be automatically disabled, depending on the lighting conditions.
• [HIGH], [STANDARD], or [LOW] represents the maximum range of effect.
Applicable modes:
The camera automatically removes noise that appears when the shutter speed becomes
slower to take pictures of night scenery etc. so you can take beautiful pictures.
[ON]/[OFF]
Note
•
If you set [ON], the countdown screen is displayed when the shutter button is pressed. Do not
move the camera at this time. After the countdown is finished, [Please wait...] is displayed for
the same time as the selected shutter speed for signal processing.
• We recommend using a tripod when the shutter speed is slowed to take pictures.
• [Long Shtr NR] is disabled during motion picture recording.
Applicable modes:
When the screen periphery darkens as a result of the lens characteristics, you can record
pictures with the brightness of the screen periphery corrected.
[ON]/[OFF]
Note
•
This feature may be automatically disabled, depending on the recording conditions.
• Noise in the periphery of the picture may stand out with higher ISO sensitivity.
• Correction is not possible in the following cases:
– When recording motion pictures
– Recording still pictures while recording a motion picture
• Depending on the lens used, [Shading Comp.] may not operate.
Refer to the website for compatible lenses.
[i.Dynamic] (Intelligent dynamic range control)
[Long Shtr NR]
[Shading Comp.]