Operation Manual

- 159 -
Recording
• Imaging device and image processing is optimised when the camera is purchased. Use this
function when bright spots that do not exist in the subject get recorded.
• Turn the camera off and on after the pixels are corrected.
• Dust Reduction Function will operate automatically when the camera is turned on, but you can
use this function when you see dust. (P195)
• When using a Leica lens mount adaptor (DMW-MA2M, DMW-MA3R: optional), set it to [ON].
[Touch Scroll]
This allows you to set the speed of continuously forwarding or
rewinding pictures using touch operation.
[
H]: High speed
[
L]: Low speed
[Menu Resume]
Stores the location of the last-used menu item for each menu.
[ON]/[OFF]
[Pixel Refresh]
It will perform optimization of imaging device and image
processing.
[Sensor Cleaning]
Dust reduction to blow off the debris and dust that have affixed to
the front of the imaging device is performed.
[Shoot w/o Lens]
Sets whether or not the shutter can be released when no lens is
attached to the main body.
[ON]: Shutter will operate regardless of the lens on the unit.
[OFF]: You cannot press the shutter button when a lens is not
attached to the camera body or is not attached
correctly.