Operation Manual

- 73 -
Basic
• Refer to P63 for details.
• If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
• This enables the firmware versions of the camera and lens to be checked.
• [–. –] is displayed as the lens firmware when the lens is not mounted.
• Touch [Software info] on the version display screen to display information about the software on
the unit.
• The folder number is updated and the file number starts from 0001.
• A folder number between 100 and 999 can be assigned.
The folder number should be reset before it reaches 999. We recommend formatting the card
(P73) after saving the data on a PC or elsewhere.
• To reset the folder number to 100, format the card first and then use this function to reset the
file number.
A reset screen for the folder number will then appear. Select [Yes] to reset the folder number.
• When the recording setting is reset, the content of the following settings is also reset.
– The [Face Recog.] setting
– The [Profile Setup] setting
• When [Setup]/[Custom] menu settings are reset, the following settings are also reset.
– The [World Time] setting
– The settings of [Travel Date] (departure date, return date, location)
– [Registered image] set as the background of the Top Menu screen (P63)
• The folder number and the clock setting are not changed.
• Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not
turn the camera off during formatting.
• If the card has been formatted on a PC or other equipment, format it on the camera again.
• If the card cannot be formatted, please try another card before contacting your nearest Service
Centre.
[Menu Background] Set the background colour for the menu screen.
[Language] Set the language displayed on the screen.
[Version Disp.] —
[No.Reset]
Reset the file number of the next recording to 0001.
[Reset]
The [Rec] or [Setup]/[Custom] menu settings are reset to the
initial settings.
[Format]
The card is formatted.
Formatting permanently deletes all data on your memory
card. Please be sure all pictures and motion pictures are
saved elsewhere before using this feature.