Operation Manual

- 83 -
Recording
Applicable modes:
Compensating the Exposure
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.
•
Select [0] to return to the original exposure.
• Rotate the control dial to display the [Expo.Meter]. (P155) (However, it does not appear
in Mode.)
Note
•
The set exposure value is memorised even if the camera is turned off.
• The compensation range of the exposure will be limited depending on the brightness of the
subject.
• When numerical values for aperture and shutter speed are displayed in Programme AE Mode,
each press of the cursor button 3 switches between Programme Shift (P46) and Exposure
Compensation.
• In Aperture-Priority AE Mode, each press of the cursor button 3 switches between Aperture
Setting (P108) and Exposure Compensation.
• In Shutter-Priority AE Mode, each press of the cursor button 3 switches between Shutter
Speed Setting (P109) and Exposure Compensation.
Press 3 (È) to switch to Exposure
Compensation operation.
Rotate the control dial to compensate the
exposure.
A Exposure Compensation value
B [Expo.Meter]
Underexposed
Properly
exposed
Overexposed
Rotate the control
dial to the right to
correct the exposure
in the plus direction.
Rotate the control
dial to the left to
correct the exposure
in the minus
direction.
A B