Operation Manual

- 95 -
Recording
When selecting [ ]
You can set the focus position precisely by enlarging the screen.
•
The focus position cannot be set at the edge of the screen.
1 Touch the subject.
•
The assist screen for setting the focus position is enlarged to
approximately 5 times original size.
• The assist screen can also be displayed by pressing 2, pressing
4 to display the enlarged position setting screen, and then
selecting the enlarged position using the cursor buttons and
pressing [MENU/SET].
2 Drag the screen to align the subject on the cross point of the crosshair in the
centre of the screen.
•
It is also possible to move the focus position with the cursor button.
• Touching [Reset] will bring the focus position back to the centre position.
• On the assist screen, it is also possible to record a picture by touching [ ].
Note
•
The spot metering target can also be moved to match the AF area when the [Metering Mode]
(P146) is set to [Ù]. At the edge of the screen, the metering may be affected by the brightness
around the AF area.
• When using digital zoom, the position and size of the AF area cannot be changed.