Operation Manual

135
VQT3A48
Recording
• It will display dial operation guide to the screen that is possible to
perform Exposure Compensation, Programme Shift, aperture setting,
or shutter speed setting when set to [ON].
A Dial operation guide
• Imaging device and image processing is optimised when the camera is purchased. Use this
function when bright spots not in subject get recorded, and it is bothering you.
• Turn the camera off and on after the pixels are corrected.
[TOUCH Q.MENU]
Enables/disables the Quick Menu during the touch operation.
[OFF]: Setting for not using the Touch Quick Menu. [ ] is
not displayed on the recording screen.
[ON]: The Touch Quick Menu can be used.
[TOUCH SHUTTER]
Enables/disables the Touch Shutter function.
[OFF]: Setting for not using the Touch Shutter function. [ ]
is not displayed on the recording screen.
[ON]: The Touch Shutter function can be used.
[TOUCH GUIDE]
When playing back the pictures, this allows you to set either to
display or not display the guide screen of the touch panel.
[OFF]/[ON]
[TOUCH SCROLL]
This allows you to set the speed of continuously forwarding or
rewinding pictures using touch operation.
[
H]: High speed
[
L]: Low speed
[DIAL GUIDE]
Sets if the operation switch guide when the mode dial is switched
to , , and is to be displayed or not.
[OFF]/[ON]
[MENU RESUME]
The last operated menu position is saved even if the camera is
turned off.
[OFF]/[ON]
[PIXEL REFRESH]
It will perform optimization of imaging device and image
processing.
××
A
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 135 ページ ２０１０年１０月１４日 木曜日 午後３時５０分