Operation Manual
VQT3A48
148
Playback/Editing
You can enlarge and then clip the important part of the recorded picture.
1 Select [CROPPING] on the [PLAYBACK] Mode menu. (P55)
2 Press 3/4 to select [SINGLE] or [SINGLE IN BURST GROUP], and then press
[MENU/SET].
•
When [SINGLE IN BURST GROUP] is selected, press 3/4/2/1 to select burst picture
group, and press [MENU/SET] to proceed to step
3.
3 Press 2/1 to select the picture, and then press [MENU/SET].
4 Use the rear dial and press 3/4/2/1 to select the parts to be cropped.
5 Press [MENU/SET].
6 Press 3 to select [YES] and then press [MENU/SET].
•
Press [‚] to return to the menu screen.
Note
•
Depending on the cut size, the picture size of the cropped picture may become smaller than
that of the original picture.
• The picture quality of the cropped picture will deteriorate.
• It may not be possible to crop pictures recorded with other equipment.
• Motion pictures, pictures stamped with [TEXT STAMP] and pictures taken with [ ],
[ ] or [ ] cannot be cropped.
• Information regarding the Face Recognition in the original picture will not be copied to images
having undergone [CROPPING].
You can convert pictures taken with a [W] aspect ratio to a [Y], a [X] or a [ ] aspect
ratio.
1 Select [ASPECT CONV.] on the [PLAYBACK] Mode menu. (P55)
2 Press 3/4 to select [SINGLE] or [SINGLE IN BURST GROUP], and then press
[MENU/SET].
3 Press 3/4 to select [Y], [X] or [ ] and then press [MENU/SET].
•
When [SINGLE IN BURST GROUP] is selected, press 3/4/2/1 to select burst picture
group, and press [MENU/SET] to proceed to step
4.
4 Press 2/1 to select a picture taken with [W] aspect ratio, and then press
[MENU/SET].
5 Press 2/1 to determine the horizontal position, and press
[MENU/SET] to set.
•
Use 3/4 to set the frame position for pictures rotated vertically.
6 Press 3 to select [YES] and then press [MENU/SET].
•
Press [‚] to return to the menu screen.
[CROPPING]
Rear dial (right): Enlargement
Rear dial (left): Reduction
3/4/2/1: Move
? [ASPECT CONV.]
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 148 ページ 2010年10月14日 木曜日 午後3時50分