Operation Manual

157
VQT3A48
Connecting to other equipment
Playing Back Pictures on a TV Screen
1 Yellow: to the video input socket
2 White: to the audio input socket
3 Red: to the audio input socket
A Align the marks, and insert.
B AV cable (supplied)
• Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which may cause malfunction.)
Connect the AV cable B (supplied) to the video input and the audio
input sockets on the TV.
Connect the AV cable to the [AV OUT] socket on the camera.
Turn the TV on and select external input.
Turn the camera on and then press [(].
Note
•
Depending on the [ASPECT RATIO], black bands may be displayed on the top and bottom or
the left and right of the pictures.
• Do not use any other AV cables except the supplied one.
• Read the operating instructions for the TV.
• When you play back a picture vertically, it may be blurry.
• You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system
when you set [VIDEO OUT] in the [SETUP] menu.
• Audio will be played back as stereo (2ch).
• The viewfinder cannot be displayed when connected with a AV cable.
• Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.
• AV output is disabled when recording.
Playing back pictures using the AV cable (supplied)
Preparations: Set the [TV ASPECT]. (P60)
Turn this unit and the TV off.
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 157 ページ ２０１０年１０月１４日 木曜日 午後３時５０分