Operation Manual

169
VQT3A48
Connecting to other equipment
Select and set the items both on the screen in step 2 of the “Selecting a single
picture and printing it” and in step
3 of the “Selecting multiple pictures and printing
them” procedures.
When you want to print pictures on a paper size or a layout which is not supported by the
camera, set [PAPER SIZE] or [PAGE LAYOUT] to [{] and then set the paper size or the layout
on the printer. (For details, refer to the operating instructions of the printer.)
When [PRINT SET (DPOF)] has been selected, the [PRINT WITH DATE] and
[NUM. OF PRINTS] items are not displayed.
[PRINT WITH DATE]
If the printer does not support date printing, the date cannot be printed on the picture.
Since the printer’s settings may take precedence over the print with date setting, check the
printer’s print with date setting as well.
When printing images with a text stamp, please remember to set print with date to [OFF] or the
date will print on top.
In some printers, the picture date for pictures taken with the aspect ratio set to [ ] will be
printed vertically.
Note
When asking the photo shop to print the pictures
By stamping the date using [TEXT STAMP] (P145) or setting date printing at the time of the
[PRINT SET] (P151) setting before going to a photo shop, the dates can be printed at the photo
shop.
[NUM. OF PRINTS]
You can set the number of prints up to 999.
You can also use the rear dial to set.
Print Settings
Item Description of settings
[OFF] Date is not printed.
[ON] Date is printed.
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 169 ページ 2010年10月14日 木曜日 午後3時50分