Operation Manual

17
VQT3A48
Before Use
Note
•
If you use a commercially available liquid crystal protection
sheet, please follow the instructions that accompany the
sheet. (Some liquid crystal protection sheets may impair
visibility or operability.)
• Apply a little extra pressure when touching if you have a
commercially available protection sheet affixed or if you feel it
is not responding well.
• Touch panel will not operate properly when the hand holding
this unit is pressing on the touch panel.
• Do not press on the LCD monitor with hard pointed tips, such as ball point pens.
• Do not operate with your fingernails.
• Wipe the LCD monitor with dry soft cloth when it gets dirty with finger prints and others.
• Do not scratch or press the LCD monitor too hard.
• For information about the icons displayed on the touch panel, refer to “LCD Monitor Display/
Viewfinder Display
” on P174.
∫ About the Stylus pen
It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate
with your fingers.
• Only use the supplied stylus pen.
• Do not place it where small children can reach.
This document expresses the up, down, left, and right of the cursor button as follows, or as
3/4/2/1.
Even when the camera is operated using the touch panel, it is
possible to operate with the cursor button and [MENU/SET] button
if a guide like the one shown on the right is displayed.
Cursor button: Selection of items or setting of values etc. is
performed.
[MENU/SET]: Confirmation of setting contents or exit from menu
is performed.
Cursor buttons/[MENU/SET] button
e.g.: When you press the 4 (down) button
or Press 4
ョㄏビ
ョㄏピ
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 17 ページ ２０１０年１０月１４日 木曜日 午後３時５０分