Operation Manual

VQT3A48
26
Preparation
Note
•
Remove the battery after use. Store the removed battery in the battery case (supplied).
• The battery will be exhausted if left for a long period of time after being charged.
• Before removing the battery, turn the camera off, and wait until the status indicator has gone off
completely. (Otherwise, this unit may no longer operate normally and the card itself may be
damaged or the recorded pictures may be lost.)
• The supplied battery is designed only for the camera. Do not use it with any other equipment.
• The battery becomes warm after using it and during and after charging. The camera also
becomes warm during use. This is not a malfunction.
∫ Battery indication
The battery indication is displayed on the screen.
[It does not appear when you use the camera with the AC adaptor (DMW-AC8E; optional)
connected.]
•
The indication turns red and blinks if the remaining battery power is exhausted. (The status
indicator also blinks) Recharge the battery or replace it with a fully charged battery.
∫ Recording still pictures (when using the LCD monitor)
(By CIPA standard in Programme AE Mode)
∫ Recording still pictures (when using the viewfinder)
(By CIPA standard in Programme AE Mode)
Approximate operating time and number of recordable pictures
When the 14–140 mm/F4.0–5.8 lens supplied in
DMC-GH2H is used
Number of recordable pictures Approx. 320 pictures
Recording time Approx. 160 min
When the 14–42 mm/F3.5–5.6 lens supplied in
DMC-GH2K is used
Number of recordable pictures Approx. 330 pictures
Recording time Approx. 165 min
When the 14–140 mm/F4.0–5.8 lens supplied in
DMC-GH2H is used
Number of recordable pictures Approx. 330 pictures
Recording time Approx. 165 min
When the 14–42 mm/F3.5–5.6 lens supplied in
DMC-GH2K is used
Number of recordable pictures Approx. 340 pictures
Recording time Approx. 170 min
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 26 ページ ２０１０年１０月１４日 木曜日 午後３時５０分