Operation Manual

VQT3A48

Basic

Applicable modes:

Just by touching the subject to focus, it will focus on the subject and take the picture

automatically.

1 Touch [ ] in Recording Mode.

•

Icon will change to [ ], and taking a picture with the

Touch Shutter function becomes possible.

2 Touch the subject you wish to focus on, and then

take a picture.

A Rough indication of the area that can be focused with

the Touch Shutter

• AF area with same function as [Ø] in AF Mode is

displayed at the position you touch, and a picture is

taken when it is focused. (It cannot be set to edge of the screen.)

• If the histogram is displayed on top of the subject you want to touch, touch the subject

after first moving the histogram. (P66)

3 Touch [ ] to cancel the Touch Shutter function.

Note

•

If [FOCUS PRIORITY] is [ON], when the Focus Mode is set to [AFS] and the Touch Shutter

fails, AF area will disappear after turning red, and the picture will not be taken.

When set to [AFC], the picture will not be taken if the focus indication is flashing green, but if

the subject comes into focus while keeping touching the screen, the picture will be taken.

• Measurement of brightness is performed on the spot touched when the [METERING MODE] is

set to [Ù]. (P122)

Taking pictures using the Touch Shutter function

DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 38 ページ２０１０年１０月１４日　木曜日　午後３時５０分