Operation Manual

VQT3A48

Basic

Perform these settings if you need to.

About the Setup Menu

[CLOCK SET], [ECONOMY] and [AUTO REVIEW] are important items. Check their

settings before using them.

For details on how to select the [SETUP] menu settings, refer to P55.

•

Refer to P31 for details.

• Refer to P116 for details.

• Refer to P115 for details.

• The [E-SHUTTER VOL] only works when set to [SH] for Burst Mode.

• When you connect the camera to a TV, the volume of the TV speakers does not change.

• Adjust the brightness of the screen with 3/4, contrast and saturation

with 2/1 or the rear dial.

• When [DISPLAY] is pressed in screen shown right, it will switch to the

colour adjustment screen. Adjust between green and red with 3/4, or

between orange and blue with 2/1 or the rear dial.

Press [MENU/SET] to return to the LCD adjustment screen.

• It will adjust the LCD monitor when the LCD monitor is in use, and the

viewfinder when the viewfinder is in use.

• Some subjects may appear differently from actuality on the LCD monitor/viewfinder. However,

this does not affect the recorded pictures.

U [CLOCK SET] —

[WORLD TIME]

“ [DESTINATION]/– [HOME]

— [TRAVEL DATE] [TRAVEL SETUP]/[LOCATION]

[BEEP]

Set the volume for electronic noises and the electronic shutter

noise.

[BEEP VOLUME]:

[s] (Muted)

[t] (Low)

[u] (High)

[E-SHUTTER VOL]:

[] (Muted)

[] (Low)

[ ] (High)

u [VOLUME] Adjust the volume of the speaker to any of 7 levels.

[MONITOR]/

[VIEWFINDER]

Brightness, colour, or red or blue tint of the LCD monitor/

viewfinder is adjusted.

DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 58 ページ２０１０年１０月１４日　木曜日　午後３時５０分