Operation Manual

VQT3A48
60
Basic
If it is set to [HOLD] when the camera is set to [ ] (P35) or [ ] (P81), switching of the
playback screen display (P40) or enlargement by rotating the rear dial is possible during Auto
Review.
Regardless of the Auto Review setting, pictures will automatically be reviewed when taking
burst pictures with [SH] or [H] set (P77), and recording with Auto Bracket (P79) or with
[ASPECT BRACKET] (P125). (Will not hold) Also, you cannot set the Auto Review function.
If [HIGHLIGHT] (P130) is set to [ON], white saturated areas appear blinking in black and white
when the Auto Review function is activated.
When [AUTO REGISTRATION] in [FACE RECOG.] (P109) is set to [ON], [AUTO REVIEW] can
only be set to [3SEC.] or [5SEC.].
When [PC] is selected, the camera is connected via the “USB Mass Storage” communication
system.
When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture Transfer
Protocol)” communication system.
This will operate when the AV cable or HDMI mini cable (optional) is connected.
This will work when the AV cable is connected.
o [AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[OFF]/[1SEC.]/[3SEC.]/[5SEC.]
[HOLD]:
The pictures are displayed until shutter button is pressed halfway.
x [USB MODE]
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
| [VIDEO OUT]
Set to match the colour television system in each country.
[NTSC]: Video output is set to NTSC system.
[PAL]: Video output is set to PAL system.
[TV ASPECT]
Set to match the type of TV.
[W]: When connecting to a 16:9 screen TV.
[X]: When connecting to a 4:3 screen TV.
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 60 ページ 2010年10月14日 木曜日 午後3時50分