Operation Manual

VQT3A48
62
Basic
When it is set to [ON], you can set/cancel favourites by pressing 4
during playback. You can also set favourites from the playback menu.
For details, refer to P150.
Calibration is not done if correct position is not touched. Touch the [i] mark again.
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[–. –] is displayed as the lens firmware when the lens is not mounted.
Ü [FAVORITE FUNC.]
Marks can be added to pictures, and set up as favourites.
[OFF]/[ON]
[MENU GUIDE]
Set the screen that is displayed when the mode dial is set to ,
, , and .
[OFF]: The recording screen in the currently selected
Advanced Scene Mode (P97), Scene Mode (P99) or
Creative Motion Picture Mode (P106) appears.
[AUTO]: The Advanced Scene Mode, Scene Mode or Creative
Motion Picture Mode menu screen appears.
[CALIBRATION]
Adjust the position of the touch panel if a different thing gets
selected from what you touched or touch operation does not
respond.
1 Press [MENU/SET].
2 Touch the orange [r] mark
displayed on the screen in order
with the stylus pen (supplied)
(5 places).
A message is displayed once the
position is set.
3 Press [MENU/SET] to finish.
~ [LANGUAGE]
Set the language displayed on the screen.
[ENGLISH]/[DEUTSCH]/[FRANÇAIS]/[ESPAÑOL]/[ITALIANO]/
[¢]
[VERSION DISP.]
This enables the firmware versions of the camera and lens to be
checked.
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 62 ページ 2010年10月14日 木曜日 午後3時50分