Operation Manual

VQT3A48

Recording

Note

•

With the Extra Tele Conversion, for example, when it is set to [ ] (equal to 4 million pixels), it

will take the picture using the 4 million pixels in the centre out of the 16 million pixels of the

imaging device, resulting to be more of a telephoto picture.

• When the Extra Tele Conversion is used, angle of view for still pictures will be different from the

angle of view for motion pictures because the zoom factor is different between them. Angle of

view for recording can be checked beforehand by matching the [ REC AREA] (P134) setting

to the mode you wish to record in.

• If you use the zoom function after focusing on the subject, focus on the subject again.

• When using the Digital Zoom, [STABILIZER] may not be effective.

• If camera shake (jitter) is a problem during Digital Zooming, it is recommended that

[STABILIZER] be set to [MODE1].

• When using the Digital Zoom, we recommend using a tripod and the self-timer (P81) for taking

pictures.

• The AF Mode is fixed to [Ø] when using the Digital Zoom.

• The Extra Tele Conversion and Digital zoom cannot be used in the following cases.

– When [QUALITY] is set to [ ], [ ] or [ ]

DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 68 ページ２０１０年１０月１４日　木曜日　午後３時５０分