Operation Manual

VQT3A48

Recording

Applicable modes:

Adjust the flash output if the recorded pictures are too bright or too dark.

1 Select [FLASH ADJUST.] in the [REC] Mode menu. (P55)

2 Press 2/1 to set the flash output and then press

[MENU/SET].

•

You can adjust from [j2 EV] to [i2 EV] in steps of [1/3 EV].

• Select [0 EV] to return to the original flash output.

Note

•

[i] or [j] is displayed on the flash icon in the screen when the flash

level is adjusted.

[REC] Mode:

Optical Image Stabilizer

Using one of these modes, jitter during picture taking is detected, and the camera

automatically compensates the jitter, enabling jitter-free images to be taken.

The lens supplied in DMC-GH2H/DMC-GH2K has a stabilizer function.

•

There is an [O.I.S.] switch on the 14–140 mm/F4.0– 5.8 lens supplied in DMC-GH2H.

• There is no [O.I.S.] switch on the 14–42 mm/F3.5–5.6 lens supplied in DMC-GH2K. Set the

[STABILIZER] settings in the [REC] Mode menu.

Adjust the flash output

When using a lens with an [O.I.S.] switch, it is

possible to set to enable the Optical Image Stabilizer

by switching the [O.I.S.] switch on the lens to [ON].

(It is set to [MODE1] at the time of purchase.)

Example when a lens with the

[O.I.S.] switch is mounted.

DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 74 ページ２０１０年１０月１４日　木曜日　午後３時５０分