Operation Manual

VQT3A48

Recording

[REC] Mode:

Setting the Light Sensitivity

This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure

enables pictures to be taken even in dark places without the resulting pictures coming out

dark.

Press 3 ().

Touch the ISO sensitivity to select.

Touch [SET].

¢ When the [ISO LIMIT SET] of [REC] Mode menu (P124) is set to anything except [OFF],

it is set automatically within the value set in [ISO LIMIT SET].

It is set as following when the [ISO LIMIT SET] is set to [OFF].

[When the 3D interchangeable lens (optional) is attached, it may become higher than the

following settings.]

• When [AUTO] is selected, ISO sensitivity is adjusted automatically depending on

brightness within a maximum setting of [ISO400].

• When setting to [ ], ISO sensitivity will adjust automatically depending on brightness

within the maximum setting of [ISO800]. ([ISO400] when the flash is used)

• The ISO sensitivity will be set to [AUTO] (for motion pictures) when recording motion pictures.

Also, the [ISO LIMIT SET] will not operate.

• Setting items below will be selectable in Creative Motion Picture Mode.

[AUTO]/[160] to [3200]

ISO sensitivity

160 12800

Recording location

(recommended)

When it is light (outdoors) When it is dark

Shutter speed Slow Fast

Noise Less Increased

ISO sensitivity

Settings

AUTO

The ISO sensitivity is automatically adjusted according to the

brightness.

(Intelligent)

The ISO sensitivity is adjusted according to the movement of

the subject and the brightness.

160/200/250/320/400/500/640/

800/1000/1250/1600/2000/2500/

3200/4000/5000/6400/8000/

10000/12800

The ISO sensitivity is fixed to various settings.

DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 91 ページ２０１０年１０月１４日　木曜日　午後３時５０分