Operation Manual

Recording

Set the White Balance value. Use to match the condition when taking photographs.

1 Press [ ].

2 Rotate the rear dial or front dial to select [ ], [ ], [ ], or [ ], and then

press 3.

3 Aim the camera at a sheet of white paper etc. so that the

frame in the centre is filled by the white object only and

then press [MENU/SET].

•

White Balance may not be set when the subject is too bright or too dark. Set the White Balance

again after adjusting to appropriate brightness.

You can set the colour temperature manually for taking natural pictures in different lighting

conditions. The colour of light is measured as a number in degrees Kelvin. As the colour

temperature increases, the picture becomes more bluish. As the colour temperature

decreases, the picture becomes more reddish.

1 Press [ ].

Rotate the rear or front dial to select [ ], and then press

3 Press 3/4 to select the colour temperature and then

press [MENU/SET].

•

You can set a colour temperature from [2500K] to [10000K].

Setting the White Balance manually

Setting the colour temperature

6500K