Operation Manual

Wi-Fi/NFC

(ENG) VQT5B09

A Wi-Fi connection using NFC function is possible by touching the smartphone/tablet to

this unit, and you can easily transfer images displayed on the screen.

An image can be sent on site immediately after taking it, so you can easily send it to the

smartphone/tablet

of your family or friend.

¢ Installing the “Image App” is required for use.

1 Play back the picture you want to transfer to the smartphone/tablet in the

camera.

2 Launch “Image App” on the smartphone/tablet at the transfer destination.

3 While [ ] is displayed on the connection

screen of the “Image App”, touch the

smartphone/tablet to [ ] of this unit.

•

It may take time to complete the connection.

• If a connection attempt by touching fails, restart the

“Image App”, and then display the screen in step

again.

• They cannot be transferred as a batch.

• Depending on the environment you are using, it may take a few minutes to complete the image

transfer.

Transferring images stored in the camera easily

Preparation:

(On the camera)

•

Set [NFC Operation] to [ON].

• Set [Touch Sharing] to [ON].

(On your smartphone/tablet)

•

Check that your smartphone/tablet is a

compatible model.

• Turn on the Wi-Fi function.

• Install the “Image App” in advance. (P67)

DMC-GX7C&GX7K&GX7EB-VQT5B09_eng.book 71 ページ２０１３年７月１６日　火曜日　午後２時１２分