Digital Camera Operating Instructions

Others
106
ª Using the specified external
flashes
• When you use the following external
flashes, the information about the ISO
sensitivity, the aperture value or other
on the camera is transferred to the
flash and then you can use various
functions of the flash such as the
adjustment of the range of the light
control according to the aperture value
or the display of the range of the light
control.
ª Available external flash settings
• Set the mode on the external flash to
either of Auto or Manual. (The [TTL]
mode cannot be activated properly.
However, TTL/GNC mode can be also
used for SF-24D only.)
• Any exposure mode can be set on the
camera.
• Different aperture values may be
displayed between the camera and the
external flash, but flash can be
activated properly.
Flashes Adaptor Conditions
Metz
54MZ-3
SCA3502 AUTO
Metz
44MZ-2
SCA3502 AUTO
Metz
70MZ-5
SCA3502 AUTO
LEICA
SF-20
Not
needed
AUTO
LEICA
SF-24D
Not
needed
AUTO,
TTL-GNC
±±±j
±±±±
±±jj
±±±±
LC1-GN.book 106 ページ ２００４年１月２９日 木曜日 午前９時１５分