Digital Camera Operating Instructions

Recording pictures (basic)
37
¬
Suggestions/Tips
¬
When pressing the shutter button
halfway, the screen may become
dark or bright for a moment; this is
not a malfunction. This is caused
by adjusting the aperture value.
When you slow the shutter speed,
the shutter may be kept closed after
recording due to the signal
conditioning. This is not a
malfunction.
We recommend setting the clock
again before taking pictures. (P20)
When the time for power save is set
(P24), the camera is automatically
turned off if you do not operate within
the set time. When operating the
camera again, press the shutter button
or turn the camera off and on.
ª Posture to take good pictures
To take pictures without blurring:
Hold the camera gently with your both
hands, keep arms stationary at your
side and stand with your feet slightly
apart.
Check that the camera is not shaken
when pressing the shutter button
halfway.
After pressing the shutter button, keep
the camera stationary until the picture
appears on the screen.
In the following cases, keep the
camera stationary for a long time.
In Slow sync. [ ] or Slow
sync./Red-eye reduction [ ]
(P44)
When you set the shutter speed
slower (P30, P31)
When recording with LCD Monitor
When recording with Viewfinder
Position of feet
Hold the camera firmly with your right
hand.
Fix your left hand by attaching your
hand to the lens ring.
Do not cover the AF Sensor, the white
balance sensor or the microphone
with your finger.
LC1-GN.book 37 ページ 2004年1月29日 木曜日 午前9時15分