Digital Camera Operating Instructions

Recording pictures (advanced)

Finely Adjusting the White Balance

If you cannot acquire the desirable hue with white balance because of too many

different light sources, etc., adjust the fine white balance as follows.

Preparation

• Set the operational mode dial except for [ ]. (P29)

• Set the white balance to [ ]/[ ]/[ ]/[ ]/[ ]. (P61)

1 Select [WB ADJUST.]. 2 Adjust the white balance.

• 1 [BLUE]: Press when the hue is

reddish.

• 2 [RED]: Press when the hue is

bluish.

• Close the function by pressing

4/[REVIEW] after finishing the

adjustment.

Suggestions/Tips

• The white balance icon turns red or

blue.

• You can set the value independently

for each of the modes in white

balance.

• When you set the white balance using

the White set [ ], the adjustment

level is set to “0”.

• The adjusted picture will be close,

though may not be identical to the

actual picture.

2560

REC

SETUP

W.BALANCE

WB ADJUST.

PICT.SIZE

QUALITY

SELECT SET EXIT

REVIEW

SELECT EXIT

WB ADJUST.

RED BLUE

REVIEW

LC1-GN.book 64 ページ２００４年１月２９日　木曜日　午前９時１５分