Operating Instructions

58
VQT1L50
Advanced-Shooting
Setting the travel destination area
(Perform steps 1, 2 and 3 on P57 .)
1 Press e to select [DESTINATION] and
then press [MENU/SET] to set.
WORLD TIME
DESTINATION
HOME
CANCEL
SET
SELECT
A
A Depending on the setting, the time at
the travel destination area or the home
area is displayed.
If you are setting the travel destination
area for the fi rst time, the date and time
are displayed as shown in the screen
above.
2 Press w/q to select the area the travel
destination is in and then press [MENU/
SET] to set.
SELECT SET
CANCEL
Adelaide
The current time at the selected travel
destination area is displayed on the top
right of the screen and the time difference
from the home area is displayed at the
bottom left of the screen.
If daylight saving time [ ] is used in
your travel destination, press e. (The
time advances by one hour.) Press e
again to return to the original time.
■
•
•
•
3 Press [MENU/SET] to close the menu.
SETUP
SELECT
EXIT
BATTERY TYPE
CLOCK SET
WORLD TIME
MONITOR
LCD MODE
OFF
The icon changes from [ ] to [ ] after
setting the travel destination.
Return the setting to [HOME] when
the vacation is fi nished by performing
steps 1, 2, 3 and then steps 1 and 2 of
“Setting the home area [HOME]” ( P57 ).
If you cannot fi nd the travel destination in
the areas displayed on the screen, set by
the time difference from the home area.
Now when you play photographs taken
while on holiday, the travel icon [ ]
appears.
•
•
•
•
VQT1L50_DMC-LS80_P-PC.indd 58VQT1L50_DMC-LS80_P-PC.indd 58 2007/12/31 16:03:502007/12/31 16:03:50