Operating Instructions

76
VQT1L50
Advanced-Viewing
Delete the title (for [SINGLE] only)
In step 2 when [SINGLE] is selected,
delete all the texts, select [EXIT], and
press [MENU/SET].
Press [MENU/SET] twice to close the
menu.
Registered text can be displayed on the
screen of this unit. (Displayed on slide if
too many texts are input.)
The name setting of [BABY] or [PET]
mode can be registered by using the
same operation as “Single setting”.
However, the name setting and [TITLE
EDIT] cannot be registered at the same
time.
You can use the software
[PHOTOfunSTUDIO-viewer-] on the
CD-ROM (supplied) to print the text
(comments). For details, refer to the
operating instructions (PDF fi le) of the
software.
Example of text entry
In case of entering [LUMIX]:
1 Move e/r/w/q to move the cursor to
[L] and then press [MENU/SET].
2 Move e/r/w/q to move the cursor to
[U] and then press [MENU/SET].
3 Move e/r/w/q to move the cursor to
[M] and then press [MENU/SET].
4 Move e/r/w/q to move the cursor to
[I] and then press [MENU/SET].
5 Move e/r/w/q to move the cursor to
[X] and then press [MENU/SET].
■
1.
2.
•
•
•
[ TEXT STAMP]
Stamping the text on your pictures
You can stamp the set text, date and time
of recording, the age and the travel date on
the recorded pictures.
This function is suitable when you print
4˝ × 6˝/10 × 15 cm images. (Images are
resized when you add the text to the
pictures taken with a resolution of more
than [
].)
Select [
TEXT STAMP] from
playback menu ( P74 ).
Press e/r to select [SINGLE] or
[MULTI] and press [MENU/SET].
PLAYBACK
SELECT
SET
CALENDAR
TITLE EDIT
TEXT STAMP
RESIZE
TRIMMING
SINGLE
MULTI
You cannot add the texts or the date to
the following images.
Pictures taken when the clock is not set
Pictures imprinted with the text stamp
Motion pictures
Pictures recorded with other equipment
Press w/q to choose a picture,
then press r.
TEXT
STAMP
SELECT
SET
EXIT
When you have selected [SINGLE] in
step 1, proceed to step 3.
When you have selected [MULTI] in step 1,
repeat step 2 for each pictures (up to 50).
You can set or cancel the picture using r .
After you select the pictures, press [MENU/
SET] and then proceed to step 3-5.
Press [MENU/SET] to close the menu.
1
•
–
–
–
–
2
•
Press [
] to display the [PLAYBACK] mode menu and select the item to set. ( P74 )
VQT1L50_DMC-LS80_P-PC.indd 76VQT1L50_DMC-LS80_P-PC.indd 76 2007/12/31 16:03:552007/12/31 16:03:55