Operating Instructions Digital Camera Model No. DMC-LS85 DMC-LS86 Before connecting, operating or adjusting this product, please read the instructions completely. For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo For Canadian assistance, please call: 1-800-99-LUMIX (1-800-995-8649) or send e-mail to: lumixconcierge@ca.panasonic.com P VQT1X05 PC VQT1X05_DMC-LS85_P-PC_EN.
Before Use Dear Customer, Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information in the box below. The serial number is on the tag located on the underside of your Camera. Be sure to retain this manual as your convenient Camera information source. Model No. Serial No.
Before Use THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Product Identification Marking is located on the bottom of unit. THE FOLLOWING APPLIES ONLY IN THE U.S.A.
Before Use DMC-LS85 DMC-LS86 THE FOLLOWING APPLIES ONLY IN CANADA. This Class B digital apparatus complies with Canadian ICES-003. – If you see this symbol – Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. About the batteries • Do not heat or expose to flame.
Before Use Care of the camera • Do not strongly shake or bump the camera by dropping it etc. This unit may malfunction, recording pictures may no longer be possible or the lens or the LCD monitor may be damaged. • We strongly recommend you do not leave the camera in your trousers pocket when you sit down or forcefully insert it into a full or tight bag etc. Damage to the LCD monitor or personal injury may result.
Before Use Contents Before Use Information for Your Safety........................ 2 Quick Guide .............................................. 8 Standard Accessories............................... 9 Names of the Components ..................... 10 Preparation About the Batteries (Number of recordable pictures) ......................... 12 Inserting/Removing the Batteries/Card (Optional) ....................................... 14 About the Built-in Memory/the Card .......
Before Use • • • • • • & [BURST] .................................... 58 ' [DIGITAL ZOOM] ....................... 58 ( [COLOR MODE] ........................ 59 ) [STABILIZER] ........................... 59 W [AF ASSIST LAMP] ................. 60 n [CLOCK SET]............................. 60 Advanced-Viewing Playing Back Pictures in Sequence (Slide Show) ................................. 61 Selecting Pictures and Playing Them Back.......................................... 63 • z [FAVORITE PLAY] .........
Before Use Quick Guide This is the overview of the procedure to record pictures with this camera. For each operation, be sure to refer to the corresponding pages. 1 2 3 8 Insert the batteries. • When you do not use the card (optional), you can record or play back pictures on the built-in memory. Refer to P15 when you use a card. Turn the camera on to take pictures. • Set the clock. (P16) 1 Set the recording/playback switch to [1]. 2 Press the shutter button to take pictures.
Before Use Standard Accessories Before using your camera, check the contents. 1 Batteries • AA Alkaline batteries (LR6) 2 USB Connection Cable 3 CD-ROM • Software: Use it to install the software to your PC. 4 Hand Strap • SD Memory Card, SDHC Memory Card and MultiMediaCard are indicated as card in the text. • Card is optional. You can record or play back pictures on the built-in memory when you are not using a card.
Before Use Names of the Components 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [4] button (P25) Zoom lever (P30) Shutter button (P25) Microphone (P49) Flash (P36) Self-timer indicator (P40) AF assist lamp (P60) Lens part Lens barrel [AV OUT/DIGITAL] socket (P75, 77, 81) 6 Speaker (P21, 64) LCD monitor (P35, 93) Recording/playback switch (P17) [MENU/SET] button (P17) Camera ON/OFF switch (P16) 11 3 1 2 4 5 10 9 AV OUT /DIGITAL 7 8 13 12 14 15 22 21 16 17 18 19 10 20 VQT1X05 VQT1X05_DMC-LS85_P-PC_EN.
Before Use 15 Cursor buttons A: e /Exposure compensation (P41) B: r /Macro button (P39) C: w /Self-timer button (P40) D: q /Flash mode button (P36) In these operating instructions, operations using the cursor buttons are described as follows. e.g.: When you press the r (p) button. or Press r 16 17 18 19 20 21 22 [MODE] button (P17) 23 Status indicator (P14, 22, 25) [DISPLAY] button (P35) [Q.
Preparation Please read “Batteries” in “Cautions for Use” for more details. (P85) About the Batteries (Number of recordable pictures) Usable batteries AA Alkaline batteries (supplied) AA Rechargeable Ni-MH (nickel metal hydride) batteries (optional) • AA EVOLTA batteries (Panasonic new battery) can also be used. Unusable batteries Manganese batteries Nickel batteries Lithium batteries Ni-Cd batteries Oxyride batteries • Operation is not guaranteed when using the batteries listed above.
Preparation Recording conditions by CIPA standard • Temperature: 23 °C (73.4 °F)/Humidity: 50% when the LCD monitor is on 1. • Using a Panasonic SD Memory Card (32 MB) • Starting recording 30 seconds after the camera is turned on. (When the optical image stabilizer function is set to [AUTO]) • Recording once every 30 seconds, with full flash every second recording. • Rotating the zoom lever from Tele to Wide or vice versa in every recording. • Turning the camera off every 10 recordings.
Preparation Inserting/Removing the Batteries/Card (Optional) • Check that the camera is turned off. • Use alkaline batteries (supplied) or Ni-MH batteries (optional). • We recommend using a Panasonic card. 1 Slide the battery door A or the card door B to open it. C Press and keep the lever down and slide the door. 2 Batteries: Insert the batteries with the ( and ) poles aligned correctly. Card: Insert the card with the label side facing the back of the camera until it clicks and locks.
Preparation About the Built-in Memory/the Card The following operations can be performed using this unit. • When a card has not been inserted: Pictures can be recorded in the built-in memory and played back. • When a card has been inserted: Pictures can be recorded on the card and played back.
Preparation Note • Do not turn this unit off, remove its battery or card or disconnect the AC adaptor (optional: P103) when the access indication is lit [when pictures are being read or deleted or the built-in memory or the card is being formatted (P24)]. Furthermore, do not subject the camera to vibration or impact. The card or the data on the card may be damaged, and this unit may no longer operate normally.
Preparation Changing the clock setting 1 Press [MENU/SET]. 2 Press e/r to select [CLOCK SET]. 3 Press q and perform steps 3 and 4 for setting. 4 Press [MENU/SET] to close the menu. • You can also set the clock in the [SETUP] menu. (P21) Note • The clock is displayed when [DISPLAY] is pressed several times during recording. • When batteries have been inserted for more than 3 hours, the clock setting is stored in the camera for approximately 3 months even if the batteries are removed.
Preparation List of Recording modes 4 Intelligent Auto Mode P25 Taking pictures easily. [4] button is available. 1 Normal Picture Mode P28 Taking pictures in the desired setting. 5 Scene Mode P42 Taking pictures according to the scene. 6 Motion Pictures Mode P49 This mode allows you to record motion pictures with audio. List of Playback modes 9 Normal Playback Mode P32 Playing back the pictures normally. 8 Slide Show Mode P61 Playing back the pictures continuously.
Preparation 2 Press e/r to select a menu item. 3 Press q. 4 Press e/r to select a setting. 5 Press [MENU/SET] to confirm your setting. 6 Press [MENU/SET] to close the menu. (Example: Selecting [AF MODE]) • You can move to the next page by pressing r at the very bottom. • Depending on the item, the settings may not appear or it may be displayed in a different way. (Example: Selecting [3]) VQT1X05 VQT1X05_DMC-LS85_P-PC_EN.
Preparation Switching to the [SETUP] menu When the camera shows the menu screen after step 1 on “How to use the menu” (P18): 1 Press w to move the menu icon. 2 Press r to select the [SETUP] menu icon [e]. 3 Press q to move to the menu item list. Proceed to step 2 on “How to use the menu”. Note • Due to the camera’s specification, it may not be possible to set some of the functions or some functions may not work in some of the conditions under which the camera is used.
Preparation Perform these settings if you need to. About the [SETUP] Menu [CLOCK SET], [ECONOMY] and [AUTO REVIEW] are important items. Check their settings before using them. • In the Intelligent Auto Mode, only [CLOCK SET], [WORLD TIME], [BEEP] and [LANGUAGE] can be set. For details on how to select the [SETUP] menu settings, refer to P20. n [CLOCK SET] Set the date and time. • Refer to P16 for details. r [WORLD TIME] Set the time in your home area and travel destination.
Preparation Makes the LCD monitor easier to see. - [LCD MODE] [OFF]: Suitable for normal use. x [AUTO POWER LCD]: The brightness is adjusted automatically depending on how bright it is around the camera. c [POWER LCD]: The LCD monitor becomes brighter and easier to see even when taking pictures outdoors. y [HIGH ANGLE]: The LCD monitor is easier to see when taking picture with the camera held high above your head. • High Angle Mode is canceled if you turn the camera off. (Same occurs in [POWER SAVE].
Preparation • [POWER SAVE] does not work in the following cases. – When using the AC adaptor/When connecting to a PC or a printer/When recording or playing back motion pictures/During slide show/[AUTO DEMO] • [AUTO LCD OFF] does not work in the following cases.
Preparation v [FORMAT] Initializes the built-in memory or card. Formatting irretrievably deletes all the data so check the data carefully before formatting. • Use batteries with sufficient power or the AC adaptor (optional: P103) when formatting. Do not turn the camera off during formatting. • If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card. • If the card has been formatted on a PC or other equipment, format it on the camera again.
Basic Recording mode: 4 Taking Pictures Using the Automatic Function (Intelligent Auto Mode) The camera automatically sets the appropriate settings according to the subject and recording condition. This mode is recommended for beginners to take pictures easily. • The following functions are activated automatically. – Scene detection/[STABILIZER]/ Face detection/Backlight Compensation • The status indicator A lights when MODE you turn this unit on B. (It turns off after about 1 second.
Basic When taking pictures using the flash (P36) When taking pictures using the zoom (P30) Note • Be careful not to move the camera when you press the shutter button. • Do not cover the photo flash or the AF assist lamp with your finger or other objects. • Do not touch the lens. Scene detection When the camera identifies the optimum scene, the icon of the scene concerned is displayed in blue for 2 seconds, after which its color changes to the usual red.
Basic About the flash • When [q] is selected, [w], [e] or [r] is set depending on the type of subject and brightness. • When [e] or [r] is set, the flash is activated twice. Settings in Intelligent auto mode Only the following functions can be set in this mode. [REC] menu – [PICTURE SIZE] (P54)/[BURST] (P58)/[COLOR MODE] (P59) The settings which can be set are different from when other recording modes are used.
Basic Recording mode: 1 Taking Pictures with Your Favorite Settings (Normal Picture Mode) This mode allows you to take pictures freely as more options are available than Intelligent Auto Mode [4] (P25). 1 Slide the recording/playback switch to [1] and press [MODE]. A Recording/playback switch 2 Press e/r to select [NORMAL PICTURE] and press [MENU/SET]. 3 Aim the AF area to the point you want to focus on. 4 Press the shutter button B halfway to focus.
Basic To adjust the exposure and take pictures at times when the image appears too dark (P41) To adjust the colors and take pictures at times when the image appears too red (P55) Focusing Aim the AF area at the subject, and then press the shutter button halfway.
Basic Subjects and recording conditions which are difficult to focus • Fast-moving subjects, extremely bright subjects or subjects without contrast • When recording subjects through windows or near shiny objects • When it is dark or when jitter occurs • When the camera is too close to the subject or when taking a picture of both distant and near subjects (when the recordable range display has appeared in red).
Basic Types of zooms Feature Optical zoom Maximum magnification 4× Picture quality No deterioration Conditions None Screen display Extended optical zoom (EZ) Digital zoom 25.5× [including extended optical zoom 6.4×] The higher the magnification No deterioration level, the greater the deterioration. [DIGITAL ZOOM] (P58) on [PICTURE SIZE] with the [REC] menu is set to [P] (P54) is selected. [ON]. 6.4× A [P] is displayed. B The digital zoom range is displayed.
Basic Playback mode: 9 Playing Back Pictures (Normal Playback Mode) 1 Slide the recording/playback switch A to [5]. A • Normal playback is set automatically in the following cases. – When the mode was switched to the Playback Mode. – When the camera was turned on while the recording/playback switch was at [5]. 2 Press w/q to select the picture. w: Play back the previous picture q: Play back the next picture • Speed of picture forwarding/rewinding changes depending on the playback status.
Basic Using the playback zoom Rotate the zoom lever towards [7] (T) to enlarge the picture. 1 2 4 8 16 • When you rotate the zoom lever towards [6] (W) after enlarging the picture, the magnification becomes lower. • When you change the magnification, the zoom position indication A appears for about 1 second, and the position of the enlarged section can be moved by A using e/r/w/q. • The more a picture is enlarged, the more its quality deteriorates.
Basic To delete multiple pictures (up to 50) or all the pictures 1 Press [4]. 2 Press e/r to select [DELETE MULTI] or [DELETE ALL] and then press [MENU/SET]. • [DELETE ALL] step 5. 3 Press e/r/w/q to select the picture and then press [DISPLAY] to set. (Repeat this step.) • The selected pictures appear with [b]. When [DISPLAY] is pressed again, the setting is canceled. 4 Press [MENU/SET]. 5 Press e to select [YES] and then press [MENU/SET] to set.
Advanced-Shooting About the LCD Monitor Press [DISPLAY] to switch the screen to be used. A LCD monitor • When the menu screen appears, the [DISPLAY] button is not activated. • During playback zoom, while playing back motion pictures and during a slide show, you can only select “Normal display” or “No display” In Recording Mode B Normal display B C C No display D Guideline display 30 When recording, you can refer to the guideline for composing.
Advanced-Shooting Recording mode: 4 1 5 Taking Pictures Using the Built-in Flash A Photo flash • Do not cover the photo flash with your fingers or any other items. Switching to the appropriate flash setting Set the flash to match the recording. 1 2 Press q [t]. 3 Press [MENU/SET]. Press e/r to switch the flash setting. • You can also press q [t] to switch the setting. • For the selectable flash settings, refer to “Available flash settings by Recording Mode”.
Advanced-Shooting Available flash settings by Recording Mode The available flash settings depend on the Recording Mode.
Advanced-Shooting Shutter speed for each flash setting Flash setting q : AUTO @ : AUTO/ Red-eye reduction t : Forced ON ` : Forced ON/Red-eye reduction [ : Slow sync./Red-eye reduction o : Forced OFF 1 2 3 Shutter speed (Sec.) 1/30 to 1/2000 1/30 to 1/2000 1/30 to 1/2000 1 or 1/8 to 1/2000 1 or 1/8 to 1/2000 1 or 1/4 to 1/2000 1 2 3 The shutter speed changes depending on the [STABILIZER] setting. When [i.
Advanced-Shooting Recording mode: 1 6 Taking Close-up Pictures This mode allows you to take close-up pictures of the subject, e.g. when taking pictures of flowers. You can take pictures approaching the subject at a distance up to 5 cm (0.17 feet) from the lens by rotating the zoom lever upmost to Wide (1 ×). 1 Press r [p]. 2 Take the pictures. • Macro shooting starts and [a] is displayed. To cancel the macro shooting, press r again. Focus range W 5 cm (0.17 feet) Changes gradually T 50 cm (1.
Advanced-Shooting Recording mode: 4 1 5 Taking Pictures with the Self-timer 1 Press w [s]. 2 Press e/r to select the time. 3 Press [MENU/SET]. 4 Press the shutter button halfway to focus and then press it fully to take a picture. • You can also press w [s] to select. • You can also press the shutter button halfway to finish. • When 5 seconds pass without any operation, the setting selected at the time is automatically adopted.
Advanced-Shooting Recording mode: 1 5 6 Compensating the Exposure Use this function when you cannot achieve appropriate exposure due to the difference of brightness between the subject and the background. Under exposed Properly exposed Compensate the exposure toward positive. 1 Over exposed Compensate the exposure toward negative. Press e [d] to display [EXPOSURE] and press w/q to compensate the exposure. • Select [0 EV] to return to the original exposure. 2 Press [MENU/SET] to finish.
Advanced-Shooting Recording mode: 5 Taking Pictures that Match the Scene being Recorded (Scene Mode) When you select a Scene Mode to match the subject and recording situation, the camera sets the optimal exposure and hue to obtain the desired picture. 1 Slide the recording/playback switch to [1]. 2 Press [MODE] to display the mode selection screen. 3 Press e/r to select [SCENE MODE] and then press [MENU/SET]. 4 Press e/r/w/q to select the Scene Mode.
Advanced-Shooting q [PORTRAIT] The person stands out with a healthier complexion. Technique for Portrait mode To make this mode more effective: 1 Rotate the zoom lever to Tele as far as possible. 2 Move close to the subject. Note • Suitable for outdoors in the daytime. • The ISO sensitivity is fixed to [ISO80]. • The initial setting for [AF MODE] is [3]. w [SOFT SKIN] The camera detects the face or skin area to achieve a smoother appearance than portrait mode.
Advanced-Shooting r [SCENERY] The camera focuses on distant subjects to allow you to take pictures of wide landscapes. Note • Flash is fixed to Forced flash OFF [o]. • The focus range is 5 m (16.41 feet) to 7. t [SPORTS] Allows you to shoot fast moving subjects (e.g. outdoor sports). Note • Suitable for daylight shooting, 5 m (16.41 feet) or more away from the subject. • [i.AUTO] is activated, and maximum ISO sensitivity level becomes [ISO1600].
Advanced-Shooting o [PARTY] Use to take pictures at wedding receptions, indoor parties, etc. Both the people and the background can be shot with natural brightness using the flash and slow shutter speed. Technique for Party mode • Use the flash. (You can set to [[] or [`].) • Use a tripod and the self-timer for best results. • Rotate the zoom lever to Wide (1 ×), about 1.5 m (4.93 feet) from the subject. Note • The initial setting for [AF MODE] is [3].
Advanced-Shooting d [PET] Suitable for taking pictures of your pet.This allows you to set the birthday (age) and name of your pet. For details on how to set age and birthday, see [BABY1]/[BABY2]. (P45) • • • • • Note [i.AUTO] is activated and maximum ISO sensitivity level becomes [ISO1600]. The initial setting for the AF assist lamp is [OFF]. The initial setting for [AF MODE] is [2]. The focus range is 5 cm (0.17 feet) (Wide)/50 cm (1.64 feet) (Tele) to 7. Refer to [BABY1]/[BABY2] for more details.
Advanced-Shooting Note • Flash is fixed to Forced flash OFF [o]. • [QUALITY] is automatically fixed to [8]. • You can take pictures suitable for 4"×6"/10×15 cm printing. • The shutter speed becomes 1/8th of a second to 1/2000th of a second. • The focus range becomes the same as in Macro Mode. [5 cm (0.17 feet)(Wide)/50 cm (1.64 feet)(Tele) to 7] • The focus, zoom, exposure, white balance, shutter speed and ISO sensitivity are fixed to the settings for the first picture.
Advanced-Shooting b [BEACH] Prevents underexposure of the subject under strong sunlight to allow you to take pictures on a beach. Note • The initial setting for [AF MODE] is [3]. • Do not touch the camera with wet hands. • Sand or seawater may cause the camera to malfunction. Make sure that sand or seawater does not get into the lens or terminals. • Problems caused by sand or seawater are not covered by the product warranty.
Advanced-Shooting Recording mode: 6 Motion Picture Mode 1 Slide the recording/playback switch to [1]. 2 Press [MODE] to display to the mode selection screen. 3 Press e/r to select [MOTION PICTURE] and then press [MENU/SET]. 4 Press the shutter button halfway to focus and then press it fully to start recording. A B A Audio recording • The available recording time B is displayed on the top right and the elapsed recording time C is displayed on the bottom right of the screen.
Advanced-Shooting 3 Press e/r to select the item and then press [MENU/SET]. Item WVGA VGA QVGA Picture size 848 × 480 pixels 640 × 480 pixels 320 × 240 pixels fps 30 fps 30 fps 30 fps Aspect ratio 16:9 4:3 • fps (frame per second); This refers to the number of frames used in 1 second. Cannot be recorded in the built-in memory. 4 Press [MENU/SET] to close the menu. • You can also press the shutter button halfway to close the menu.
Advanced-Shooting Recording mode: 4 1 5 6 Useful Functions at Travel Destinations Recording which day of the vacation you take the picture If you set the departure date or the travel destination of the vacation in advance, the number of days that have passed since the departure date (which day of the vacation it is) is recorded when you take the picture. You can display the number of days that have passed when playing back the pictures and stamp it on the recorded pictures with [TEXT STAMP] (P67).
Advanced-Shooting 7 8 9 10 Press r to select [SET] and then press [MENU/ SET]. Enter the location. • For details on how to enter characters, read the [TITLE EDIT] section on P66. Press [MENU/SET] twice to close the menu. Take a picture. • The number of days that have passed since the departure date is displayed for about 5 seconds if this unit is turned on etc. after setting the travel date or when the travel date is set. • When the travel date is set, [t] appears on the lower right of the screen.
Advanced-Shooting 1 Select [WORLD TIME] from the [SETUP] menu, and then press q. (P21) • When you are setting the world time for the first time, the [PLEASE SET THE HOME AREA] message appears. Press [MENU/SET], and set the home area on the screen in step 3. 2 Press r to select [HOME], and then press [MENU/ SET]. 3 Press w/q to select the home area, and then press [MENU/SET].
Advanced-Shooting Using the [REC] Menu g [PICTURE SIZE] For details on [REC] menu settings, refer to P18. Set the number of pixels and aspect ratio of the pictures. Select a higher number of pixels for clearer pictures. Select a lower number of pixels to store more pictures. Applicable modes: 4 1 5 Settings 4:3 [8M] 4:3 [5M P] 4:3 [3M P] 3:2 [7M] 3:2 [2.
Advanced-Shooting j [SENSITIVITY] For details on [REC] menu settings, refer to P18. ISO sensitivity represents the sensitivity of the image sensor to light. If you set the ISO sensitivity higher, the camera becomes more suitable for recording in dark places. Applicable modes: 1 [i.AUTO]/[80]/[100]/[200]/[400]/[800]/[1600] ISO sensitivity Recording location (recommended) Shutter speed Noise 80 When it is light (outdoors) Slow Less 1600 When it is dark Fast More Note • When setting to [i.
Advanced-Shooting Auto White Balance (AWB) Depending on the conditions prevailing when pictures are taken, the pictures may take on a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being used or there is nothing with a color close to white, Auto White Balance may not function properly. In a case like this, set the white balance to a mode other than [AWB].
Advanced-Shooting $ [AF MODE] For details on [REC] menu settings, refer to P18. This allows the focusing method that suits the positions and number of the subjects to be selected. Applicable modes: 1 5 [3]: Face detection The camera automatically detects the person’s face. The focus and exposure can then be adjusted to fit that face no matter what portion of the picture it is in. (max. 15 areas) [\]: 9-area-focusing The camera focuses on any of 9 focus areas.
Advanced-Shooting & [BURST] For details on [REC] menu settings, refer to P18. When you press and hold the shutter button several pictures are taken in succession. Applicable modes: 4 1 5 [OFF] & # — 3 Approx. 2 h — Max. 4 8 — Max. 7 Depends on the remaining capacity of the built-in memory/card. Burst speed (pictures/second) Number of recordable pictures The burst speed is constant regardless of the transfer speed of the card.
Advanced-Shooting ( [COLOR MODE] For details on [REC] menu settings, refer to P18. Using these modes, the pictures can be made sharper or softer, the colors of the pictures can be turned into sepia colors or other color effects can be achieved. Applicable modes: 4 1 6 [STANDARD]: [NATURAL]: [VIVID]: [B/W]: [SEPIA]: [COOL]: [WARM]: This is the standard setting. The picture becomes softer. The picture becomes sharper. The picture becomes black and white. The picture becomes sepia.
Advanced-Shooting W [AF ASSIST LAMP] For details on [REC] menu settings, refer to P18. Illuminating the subject with the AF assist lamp allows the camera to focus on the subject in low light conditions. Applicable modes: 1 5 [OFF]: [ON]: The AF assist lamp does not turn on. When taking pictures in dark places, the AF assist lamp lights while the shutter button is pressed halfway. (Larger AF areas are now displayed.) Note • The effective range of the AF assist lamp is 1.5 m (4.93 feet).
Advanced-Viewing Playback mode: 8 Playing Back Pictures in Sequence (Slide Show) You can play back the pictures you have taken in synchronization with music, and you can do this in sequence while leaving a fixed interval between each of the pictures. Furthermore, you can play back only those pictures you have set as favorites as a slide show. This playback method is recommended when you have connected the camera to a TV set to view the pictures you have taken.
Advanced-Viewing Changing the slide show settings You can change the settings for slide show playback by selecting [EFFECT] or [SETUP] on the slide show menu screen. [EFFECT] This allows you to select the screen effects or music effects when switching from one picture to the next picture. [NATURAL], [SLOW], [SWING], [URBAN], [OFF] • When [URBAN] has been selected, the picture may appear in black and white as a screen effect. [SETUP] [DURATION] or [REPEAT] can be set. Item Settings [DURATION] [1SEC.
Advanced-Viewing Playback mode: z Selecting Pictures and Playing Them Back z [FAVORITE PLAY] You can play back the pictures put in the favorites list only. (When [FAVORITE] is set to [ON] and there is more than one picture in the favorites list.) Refer to [FAVORITE] (P70) to put a picture on your favorites list or to remove it from the list. 1 Slide the recording/playback switch to [5] and then press [MODE].
Advanced-Viewing Playback mode: 9 z Playing Back Motion Pictures Press w/q to select a picture with a motion picture icon (such as [-]), and then press e to play back. C B A A The motion picture recording time B Motion picture icon C Motion picture playback icon • After playback starts, the elapsed playback time is displayed on the upper right of the screen. For example, 8 minutes and 30 seconds is displayed as [8m30s].
Advanced-Viewing Playback mode: 9 Using the [PLAYBACK] Menu You can use various functions in Playback Mode to rotate pictures, set protection for them etc. • With [TEXT STAMP] or [RESIZE], a new edited picture is created. A new picture cannot be created if there is no free space on the built-in memory or the card so we recommend checking that there is free space and then editing the picture. t [CALENDAR] You can display pictures by recording date. 1 2 Select [CALENDAR] on the [PLAYBACK] menu.
Advanced-Viewing y [TITLE EDIT] You can add text (comments) to pictures. After text has been registered, it can be included in prints using [TEXT STAMP] (P67). (Only alphabetical characters and symbols can be entered.) 1 2 3 Select [TITLE EDIT] on the [PLAYBACK] menu. (P18) Press e/r to select [SINGLE] or [MULTI] and then press [MENU/SET]. Select the picture, and then press [MENU/SET] to set.
Advanced-Viewing [MULTI] setting 1 In step 4, delete all the texts, select [EXIT], and press [MENU/SET]. 2 Press [MENU/SET] to close the menu. Note • Text can be scrolled if all of the registered text does not fit on the screen. • The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode or [TRAVEL DATE] location setting can also be registered by using the operation in steps 4 and following.
Advanced-Viewing [TITLE] Text is printed together with the image for pictures that have already been recorded with text in [BABY1]/[BABY2] or [PET] name settings in Scene Mode, [TRAVEL DATE] location setting or [TITLE EDIT]. 5 Press [MENU/SET]. • If you set [TEXT STAMP] for a picture larger than 3M, the picture size will become smaller as shown below R/T C Z M X U • The picture becomes slightly rougher. 6 Press e to select [YES] and press [MENU/SET]. 7 Press [4] to return to the menu screen .
Advanced-Viewing 3 • • • • Select the picture(s) and size(s). [SINGLE] setting [SINGLE] 1 Press w/q to select the picture, and then press [MENU/SET]. 2 Press w/q to select the size , and then press [MENU/SET]. Only the sizes to which the pictures can be resized are displayed. [MULTI] setting [MULTI] 1 Press e/r to select the size, and then press [MENU/SET]. • When [DISPLAY] is pressed, an explanation of resizing is displayed. 2 Press e/r/w/q to select the picture, and then press [DISPLAY].
Advanced-Viewing k [ROTATE DISP.] This mode allows you to automatically display pictures vertically if they were recorded holding the camera vertically. 1 Select [ROTATE DISP.] on the [PLAYBACK] menu. (P18) 2 Press r to select [ON] and then press [MENU/ SET]. • When you select [OFF], the pictures are displayed without being rotated. • Refer to P32 for information about how to play back pictures. 3 Press [MENU/SET] to close the menu.
Advanced-Viewing 3 Press [MENU/SET] to close the menu. 4 Press w/q to select a picture which you want to put on your favorites list, and then press r. • Repeat the above procedure if necessary. • [z] is added on the picture put in your favorites list. • If you want to remove a picture from the favorites list, press r again. Canceling all favorites 1 Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET]. 2 Press e to select [YES] and then press [MENU/SET].
Advanced-Viewing 3 Select the picture, and then press [MENU/SET]. [SINGLE] Press w/q to select the picture. 4 [MULTI] Press e/r/w/q to select the pictures. Press e/r to set the number of prints, and then press [MENU/SET] to set. • When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not possible to use the same setting for a multiple number of pictures.) 5 Press [4] to return to the menu screen. • Press [MENU/SET] to close the menu.
Advanced-Viewing c [PROTECT] You can set protection for the pictures you do not want to delete to prevent them from accidental erasure. 1 Select [PROTECT] on the [PLAYBACK] menu. (P18) 2 Press e/r to select [SINGLE] or [MULTI] and then press [MENU/SET]. 3 Select the picture, and then press [MENU/SET] to set. [SINGLE] [MULTI] When [MULTI] has been selected • Repeat these steps for each picture. • The settings are canceled when [MENU/SET] is pressed again. Press w/q to select the picture.
Advanced-Viewing b [COPY] You can copy recorded picture data from the built-in memory to a card or vice versa. 1 Select [COPY] on the [PLAYBACK] menu. (P18) 2 Press e/r to select the copy destination and then press [MENU/SET]. N: All the picture data in the built-in memory are copied onto the card at one time. step 4. M: One picture at a time is copied from the card to the built-in memory. step 3. 3 Press w/q to select the picture and then press [MENU/SET].
Connecting to other equipment Connecting to a PC You can acquire recorded pictures to a PC by connecting the camera and the PC. • You can easily print out or mail the pictures you have imported. Use of the “PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied) is a convenient way of doing this. • Read the separate operating instructions for the supplied software for more information about the software in the CD-ROM (supplied) and how to install it. Preparations: Turn on the camera and the PC.
Connecting to other equipment 4 Double-click [DCIM] folder. 5 Using a drag-and-drop operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the PC. Disconnecting the USB connection cable safely • Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the digital camera before removing the hardware.
Connecting to other equipment Printing the Pictures By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to be printed or start printing on the LCD monitor. Preparations: Turn on the camera and the printer. Remove the card before printing the pictures in the built-in memory. Perform the print quality and other settings at the printer before printing the pictures.
Connecting to other equipment Selecting a single picture and printing it 1 Press w/q to select the picture and then press [MENU/SET]. • A message displays for about 2 seconds. 2 PictBridge 100-0001 1/19 PLEASE SELECT THE PICTURE TO PRINT MULTI PRINT SELECT Press e to select [PRINT START] and then press [MENU/SET]. • Refer to P79 for the items which can be set before starting to print the pictures. • Press [MENU/SET] to cancel printing halfway. • Disconnect the USB connection cable after printing.
Connecting to other equipment Print Settings Select and set the items on the screen in step 2 of the “Selecting a MULTI SELECT single picture and printing it” or in step 3 of the “Selecting multiple PRINT START OFF PRINT WITH DATE pictures and printing them”. 1 NUM.
Connecting to other equipment [PAGE LAYOUT] (Layouts for printing that can be set with this unit) Item Description of settings [h] Settings on the printer are prioritized. [3] 1 page with no frame print [4] 1 page with frame print [5] 2 pages print [6] 4 pages print • An item cannot be selected if the printer does not support the page layout.
Connecting to other equipment Playing Back Pictures on a TV Screen Playing back pictures using the AV cable (optional) Preparations: Set the [TV ASPECT]. (P23) Turn this unit and the TV off. • Do not use any other cables except a genuine Panasonic AV cable (DMW-AVC1: optional). A AV OUT /DIGITAL A B 1 2 1 Yellow: to the video input socket 2 White: to the audio input socket A Align the marks, and insert.
Others Screen Display In recording Recording in Normal Picture Mode [1] (Initial setting) 1 Recording mode (P18) 1 2 3 4 5 6 7 8 2 Flash mode (P36) 8M 3 Macro shooting (P39) 15 6 4 AF area (P25, 29) 5 Focus indication (P25, 29) 6 Picture size (P54) 7 Quality (P54) 8 Battery indication (P12) 9 Remaining number of recordable pictures ISO F2.
Others 28 LCD mode (P22) 29 Number of days that have passed since the depature date (P51) 30 Burst (P58) v: Audio recording (P49) 31 AF assist lamp (P60) : W In playback 1 Playback mode (P18) 1 2 3 4 5 6 7 2 Protected picture (P73) 3 Favorites indicator (P70) : z 8M 4 Text stamp complete indicator (P67) 18 100-0001 5 Picture size (P54) 1/30 １ 17 Picture mode (P49) 15s 16 6 Quality (P54) 1ST DAY 15 7 Battery indication (P12) AWB ISO100 F2.
Others Cautions for Use Optimal use of the camera Take care not to drop or knock the unit or put a lot of pressure on it. • Take care not to knock or drop the bag/case that you inserted the camera in as the shock may cause damage to the camera, lens or LCD monitor. • Do not attach any other items to the hand strap that’s included with your camera. While being stored, that item can rest against the LCD monitor and damage it.
Others About the LCD monitor • Do not press the LCD monitor with excessive force. Uneven colors may appear on the LCD monitor and it may malfunction. • Do not press the LCD monitor with a sharp and hard tip such as the one of a ballpoint pen. • Do not scrub or press the LCD monitor with excessive force. • If the camera is cold when you turn it on, the picture on the LCD monitor will be slightly darker than usual at first.
Others Never leave the camera and the batteries in a car or on a car dashboard in the summer. • It may cause leakage of the battery electrolyte, a generation of heat, and may cause a fire and batteries to burst due to the high temperature. Proper care and handling of batteries Mishandling batteries may cause leakage, heat generation, fire or explosion. Observe the following. • Do not splash batteries with water/sea water or wet battery terminals. • Do not peel off or scratch the covering on batteries.
Others Ni-MH batteries have a limited life. Battery capacity gradually decreases over time. If the length of time you can use the camera is extremely short even after fully charging the batteries, they may have exceeded their life span. Purchase new batteries. • Battery life differs depending on the conditions of storage and usage and the environment. When not using the batteries for a long period of time • If the batteries are left in the camera they will discharge.
Others When not using the camera for a long period of time • Store the batteries in a cool and dry place with a relatively stable temperature. [Recommended temperature: 15 °C to 25 °C (59 °F to 77 °F), Recommended humidity: 40% to 60%] • Always remove the batteries and the card from the camera. • If the batteries are left inserted in the camera they will discharge as a weak electric current passes through them even if the camera is turned off.
Others Message Display Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples. [THIS MEMORY CARD IS LOCKED] The Write-Protect switch on the SD Memory Card and the SDHC Memory Card are moved to [LOCK]. Move the switch back to unlock it. (P15) [NO VALID PICTURE TO PLAY] Record a picture or insert a card with a recorded picture and then play it.
Others [MEMORY CARD ERROR FORMAT THIS CARD?] • This card has a format which is not recognized by the camera. Format the card again with the camera after saving necessary data on a PC etc. (P24) [PLEASE TURN CAMERA OFF AND THEN ON AGAIN]/[SYSTEM ERROR] • This message appears when the camera is not operating properly. Turn the camera off and on. If the message persists, contact the dealer or your nearest Service Center. [MEMORY CARD PARAMETER ERROR] Use a card compatible with this camera.
Others Troubleshooting First, try out the following procedures (P91–96). If the problem is not resolved, it may be improved by selecting [RESET] (P23) on the [SETUP] menu when taking pictures. Batteries and power source The camera turns off immediately even when battery power is full. The remaining battery power is low even if new batteries are inserted.
Others The subject is not focused properly. • The focus range varies depending on the Recording Mode. Set the proper Recording Mode for the distance to the subject. • Is the subject out of the focus range? (P25, 28 and 39) • Have you taken a picture with jitter? (P30) The recorded picture is blurred. The optical image stabilizer is not effective. The shutter speed becomes slower when pictures are taken in dark places so hold the camera firmly with both hands to take the pictures.
Others LCD monitor The LCD monitor turns off although the camera is turned on. • When the camera is not operated for a while, [POWER SAVE] or [AUTO LCD OFF] is activated for [ECONOMY]. (P22) • If the LCD monitor turns off when you press the shutter button halfway, the batteries may run out. The LCD monitor darkens during use. • This camera automatically charges for flash recording and may darken the LCD monitor for efficient charge.
Others Playback The picture being played back is rotated and displayed in an unexpected direction. • [ROTATE DISP.] (P70) is set to [ON]. The picture is not played back. • Is the recording/playback switch set to playback [5]? (P17) • Is there a picture on the built-in memory or the card? The pictures on the built-in memory appear when a card is not inserted. The picture data on the card appears when a card is inserted.
Others TV, PC and printer The picture does not appear on the television. • Is the camera connected to the TV correctly? Set the TV to video input mode. (P81) The display areas on the TV screen and the camera’s LCD monitor are different. • Depending on the TV model, the pictures may be extended horizontally or vertically or they may be displayed with their edges cut off. The motion pictures cannot be played back on a TV.
Others The AF assist lamp does not turn on. • Is [AF ASSIST LAMP] on the [REC] menu set to [ON]? (P60) • The AF assist lamp does not turn on in bright places. The camera and batteries become warm. • The surface of the camera during use and the batteries immediately after a long time use become warm. This does not cause a problem with the performance or quality of the camera. The lens clicks.
Others Number of Recordable Pictures and Available Recording Time • The number of recordable pictures and the available recording time are an approximation. (These vary depending on the recording conditions and the type of card.) • The number of recordable pictures and the available recording time vary depending on the subjects.
Others Picture size Quality Built-in Memory (Approx. 50 MB) Card 28 36 69 32 MB 7 16 20 40 64 MB 16 33 43 83 128 MB 34 69 88 165 256 MB 68 135 170 330 512 MB 135 260 340 650 1 GB 270 530 680 1310 2 GB 550 1070 1360 2560 4 GB 1080 2110 2680 5020 6 GB 1650 3210 4070 7640 8 GB 2210 4300 5450 10230 12 GB 3330 6490 8230 15430 16 GB 4450 8660 10980 20590 32 GB 8930 17390 22020 41300 Quality Built-in Memory (Approx. 50 MB) 98 3:2 [2.
Others Available recording time (In Motion Picture Mode) Picture quality setting WVGA VGA Built-in Memory (Approx.
Others Specifications Digital Camera: Information for your safety Power Source: DC 3.0 V Power Consumption: 1.2 W (When recording) 0.6 W (When playing back) Camera Effective pixels: 8,100,000 pixels Image sensor: 1/2.5˝ CCD Total pixels: 8,320,000 pixels Primary color filter Lens: Optical 4 × zoom, f=5.5 to 22 mm [35 mm film camera equivalent: 33 to 132 mm] / F2.8 to F5.9 Digital zoom: Max. 4 × Extended optical zoom: Max. 6.
Others Number of recordable When using the built-in memory: Approx. 10 pictures (immediately after formatting) pictures: When using a Card: Max. 100 pictures (differs depending on the type of Card and the recording conditions) ISO sensitivity: i.AUTO/ 80 / 100 / 200 / 400 / 800 / 1600 [HIGH SENS.
Others Terminal 102 AV OUT/DIGITAL: Dedicated jack (8 pin) DC IN: Type1 jack (Only when using DC coupler) Dimensions: 3.89˝ (W) × 2.48˝ (H) × 1.19˝ (D) (96.7 mm (W) × 62.0 mm (H) × 29.8 mm (D)) (excluding the projection part) Mass (Weight): Approx. 0.28 lb/128 g (excluding Memory Card and battery) Approx. 0.38 lb/176 g (with Memory Card and battery) Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F) Operating Humidity: 10% to 80% VQT1X05 VQT1X05_DMC-LS85_P-PC_EN.
Others Digital Camera Accessory System DC coupler: DMW-DCC2 AC Adaptor: DMW-AC6PP Connecting DC coupler and AC adaptor to the camera Read operating instructions on how to connect the DC coupler to the camera. • Purchase DC coupler and AC adaptor together. You cannot use either of them individually. AV Cable: DMW-AVC1 Soft Case: DMW-CLZ10 Semi Hard Case: DMW-CHTZ3 SDHC Memory Card SD Memory Card 32 GB SDHC Memory Card .... RP-SDV32GU1K 16 GB SDHC Memory Card ....
Others Digital Camera Accessory Order Form (For USA and Puerto Rico Customers) Please photocopy this form when placing an order. 1. Digital Camera Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.
Others Request for Service Notice (For USA and Puerto Rico Only) Please photocopy this form when making a request for service notice. In the unlikely event this product needs service. Request for Service Notice: (USA and Puerto Rico Only) • Please include your proof of purchase. (Failure to do so will delay your repair.) • To further speed your repair, please provide an explanation of what wrong with the unit and any symptom it is exhibiting.
Others Limited Warranty (For USA and Puerto Rico Only) PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Digital Still Camera Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with t
Others Carry-In or Mail-In Service For Carry-In or Mail-In Service in the United States and Puerto Rico call 1-800-211-PANA (7262). This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Others Customer Services Directory (For USA and Puerto Rico Only) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/help or, contact us via the web at: http://www.panasonic.
Others Précautions à prendre (pour le Canada) AVERTISSEMENT: POUR RÉDUIRE TOUT RISQUE D’INCENDIE, DE CHOC ÉLECTRIQUE OU DE DOMMAGE, * N’EXPOSEZ PAS CET APPAREIL À LA PLUIE, À L’HUMIDITÉ, AUX GOUTTES OU ÉCLABOUSSURES ET ASSUREZ-VOUS QU’AUCUN OBJET OU VASE REMPLI DE LIQUIDE NE SOIT PLACÉ SUR L’APPAREIL. * N’UTILISEZ QUE LES ACCESSOIRES RECOMMANDÉS. * NE RETIREZ PAS LE COUVERCLE (OU LE PANNEAU ARRIÈRE) ; AUCUNE PIÈCE INTERNE NE PEUT ÊTRE RÉPARÉE PAR L’UTILISATEUR.
Others Évitez d’approcher l’appareil photo de tout équipement magnétisé (four à microondes, téléviseur, équipement de jeux vidéo, etc.). • Si vous utilisez l’appareil photo à proximité d’un téléviseur, les radiations électromagnétiques pourraient nuire au son et à l’image. • N’utilisez pas l’appareil photo à proximité d’un téléphone cellulaire; cela pourrait entraîner un bruit nuisible à l’image et au son.
Others Index A E AC adaptor ............................... 75, 77, 103 Access indication .................................... 15 Aerial photo mode .................................. 48 AF area ............................................. 25, 29 AF assist lamp ........................................ 60 AF mode ................................................. 57 Auto demo .............................................. 24 Auto LCD off ........................................... 22 Auto power LCD .......
Others N S Night portrait mode ................................. 44 Night scenery mode ............................... 44 Normal picture mode .............................. 28 Number of prints ............................... 71, 79 Number of recordable pictures ............... 97 Scene detection ...................................... 26 Scene mode ........................................... 42 Scenery mode ........................................ 44 Self portrait mode ...................................
Others MEMO VQT1X05 VQT1X05_DMC-LS85_P-PC_EN.
Others MEMO 114 VQT1X05 VQT1X05_DMC-LS85_P-PC_EN.
Others MEMO VQT1X05 VQT1X05_DMC-LS85_P-PC_EN.
QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom. Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 © Panasonic Corporation 2008 P Printed in China VQT1X05 H1208YR0 VQT1X05_DMC-LS85_P-PC_EN.
