Digital Camera Operating Instructions

Preparation
17
VQT1X05
Changing the clock setting
1
Press [MENU/SET].
2
Press
e
/
r
to select [CLOCK SET].
3
Press
q
and perform steps
3
and
4
for setting.
4
Press [MENU/SET] to close the menu.
• You can also set the clock in the [SETUP] menu. (P21)
Note
• The clock is displayed when [DISPLAY] is pressed several times during recording.
• When batteries have been inserted for more than 3 hours, the clock setting is stored in
the camera for approximately 3 months even if the batteries are removed.
• You can set the year from 2000 to 2099.
• Set the date so that the correct date is printed when you order prints or use the text
stamp. (P67)
• If the clock is set, the correct date can be printed even if the date is not displayed on the
screen of the camera.
About the Mode and Menu Operation
Mode switching
MODE
1
Slide the recording/playback switch
A
to
1
(up) or
5
(down).
1
: Recording Mode
5
: Playback Mode
MODE
2
Press [MODE] to display the mode
selection screen.
(Example: Normal Picture Mode)
3
Press
e
/
r
to select a mode and press [MENU/SET] to close the menu.
Refer to corresponding page for more details on each mode.
VQT1X05_DMC-LS85_P-PC_EN.indb 17VQT1X05_DMC-LS85_P-PC_EN.indb 17 2008/12/22 20:20:142008/12/22 20:20:14