Digital Camera Operating Instructions

Advanced-Shooting
38
VQT1X05
Shutter speed for each ash setting
Flash setting Shutter speed (Sec.)
q
: AUTO 1/30 to 1/2000
@
: AUTO/ Red-eye reduction 1/30 to 1/2000
t
: Forced ON
`
: Forced ON/Red-eye reduction
1/30 to 1/2000
[
: Slow sync./Red-eye reduction 1 or 1/8 to 1/2000
1
o
: Forced OFF
1 or 1/8 to 1/2000
2
1 or 1/4 to 1/2000
3
1
The shutter speed changes depending on the [STABILIZER] setting.
2
When [i.AUTO] is set
3
[SPORTS], [BABY1]/[BABY2], [PET] in Scene Mode
The shutter speed reaches the maximum of 1 second for
1,
2 and
3 when:
Optical image stabilizer is [OFF]
When the optical image stabilizer is set, the camera determines that there is minimum
possibility of blurring.
In Intelligent Auto Mode, shutter speed changes depending on the identi ed scene.
Note
Do not bring the ash too close to objects or close the ash while it is activated. The objects
may be discolored by its heat or lighting.
• While the ash is charged, the LCD monitor turns off and you cannot take pictures. The status
indicator lights up.
If the remaining battery power is low, the screen may be turned off for a longer period of time.
When you take a picture beyond the available ash range, the exposure may not be adjusted
properly and the picture may become bright or dark.
The white balance may not be properly adjusted if the photo ash is insuf cient.
When the shutter speed is fast, the ash effect may not be suf cient.
It may take time to charge the ash if you repeat taking a picture. Take a picture after the
access indication disappears.
The red-eye reduction effect differs between people. Also, if the subject was far away from the
camera or was not looking at the rst ash, the effect may not be evident.
VQT1X05_DMC-LS85_P-PC_EN.indb 38VQT1X05_DMC-LS85_P-PC_EN.indb 38 2008/12/22 20:20:192008/12/22 20:20:19